PDA

View Full Version : Honda Civic 2006 immo problem PIN



kana2000
13th March, 2013, 12:13 AM
Hi Friends, my anti-theft immobilizer has locked up car honda civic 2.2 icdti year 2007. I using HONDA HDS to read fault codes found only one in imoes units "c-1
imoes unit is not registred"

When I try to register IMOES module it asking for PIN code.

How Can I get PIN?
I read memory from aerial box from ignition switch
here is dump and label:

scanvec
13th March, 2013, 11:38 AM
Hi, use Tcode without pin

scanvec
13th March, 2013, 11:48 AM
or make key with keys maker

kana2000
13th March, 2013, 01:51 PM
Hi
I don't have that tool.
key is integrated with remote and I need PIN to synchronize key, immo box, ECU and register old keys.
With your solution I need new keys.

keysph
13th March, 2013, 02:16 PM
ICC Help (http://immo-code.com/help/index.html?icc_honda_1st_immo_password.htm)
try this maybe it will help ;)

kana2000
13th March, 2013, 03:34 PM
ICC Help (http://immo-code.com/help/index.html?icc_honda_1st_immo_password.htm)
try this maybe it will help ;)

Hi
do you have that calculator?


Today I download some kind of calculator for HONDA/ACURA and I will try tomorrow and see if that is working because key coding is not enough I need to synchronise all systems and then register 2 keys I have.

Battery go flat and lost immo synchro and now alarm is all the time on and immo light flashing

kana2000
14th March, 2013, 03:50 PM
Ok
calculator not working or problem with the car.
I put last 5 vin digits 19639
and date: 14.03.2013
program generate PCM code: 5839

and not working can someone generate code for me with tomorrows date?
Thank you

kana2000
14th March, 2013, 10:06 PM
OK
Problem fixed.
software had a bug I found that and calculate proper code.
After that done immo synchro and car start no problem
both keys working
Thank you

keysph
15th March, 2013, 10:58 AM
Can you share that calculator?

correia
15th March, 2013, 11:09 AM
send vin pleese

gwee
15th March, 2013, 11:14 AM
Can you share that calculator?

Honda Calculator

kana2000
15th March, 2013, 12:00 PM
OK but this software have a bug
when ask for date (MMDDYY) you should put
MM month 03 = March
DD day 14
YY year and if you put 13 not working you should put 03.
and date on the PC must be correct

Sounds crazy about that 03 for 2013 year but working fine

and here is program

koncimobil
15th March, 2013, 12:13 PM
Year must be sub with 10.
Eg. years 2013 & 2014:
2013-10=2003 write 03
2014-10=2004 write 04

magkaos
26th August, 2015, 05:55 AM
Thanks a lot :)