Seat Alhambra 2000 MY

[oknid]

Hi all,

Can someone tell me is it possible that Seat Alhambra 2000 MY doesn?t have 35 - Central Locking AND 46 - Central Convenience module also.
I am trying to synchronize his own remote controls but without success.
Is it possible that adaptation of remotes is only possible using manual procedure??
Because manual procedure also doesn?t working.

[robert81]

only manual procedure.
alhambra and sharan dont have diagnostics remote coding procedure.
what procedure did you try? its not the same procedure as for other models

[oknid]

Thanks for quick reply.
I tried procedure from Autodata.

Obtain all keys fitted with remote control.
Close all windows and doors.
Insert key into driver's door lock.
Within 5 seconds turn key to unlock position 3 times. Remove key.

NOTE: Hold key in unlocked position for 0,5 second.

Programming mode activated (driver's door LED illuminated).
Carry out the following within 15 seconds:
Press and hold lock button
Press unlock button 3 times
Release lock button
Correct programming indicated by:
Key LED flashing 5 times - This happened to me as described
Door LED flashing 5 times - No response from the door LED ??
Repeat above procedure within 15 seconds to program

remaining keys.
To exit programming mode and extinguish LED:
Manually lock vehicle.
Wait 15 seconds.

Door LED blinks only when I turn ignition on for approx. 1 second (so LED works), but when I mannualy lock the door LED is dead !!
I think the microswitch in the door lock is broken and because of that I cannot enter in sync mode.

I also tried few of different sync procedure but no luck..