PDA

View Full Version : BMW X3 3.0D DPF



tihiuvek
15th March, 2013, 09:59 AM
Hello,

Does somebody know is it possible to make DPF off on DDE7 ecu - bosch 0281013051?
I supposed that is EDC16+C35 ecu.
Thanks!

furnata
15th March, 2013, 11:02 AM
Yes its possible

tihiuvek
15th March, 2013, 12:39 PM
I will recive today ECU. I supposed it is MPC 5XX ecu.
Is it correct?

assitutto
15th March, 2013, 01:59 PM
yes you can read write with many different tool, galletto, mpps, bdm ecc ecc

yas200
15th March, 2013, 02:37 PM
Not use programm for dpf off. All not work - include swiftec. Need only manualy. Combination metod. Swith metod not worked))) (use 90% tuner)

tihiuvek
15th March, 2013, 03:16 PM
Does somebody know where are the maps and switches for dpf?
It will help if somebody has tested file + original for comparation.
I just recived ECU. But I got problem to connect Galleto2 to ecu over BDM port.
It is MPC564MZP56B MCU - but BDM port is not clear to me.
Pictures in attachement.
Thanks!

assitutto
15th March, 2013, 04:32 PM
you have instruction for BDM in c:\FGtech\documents\BDM_MPC

for dpf off file first read your ori file, then upload on forum and wait for free file or pay professional tuner for tested solution

tihiuvek
16th March, 2013, 08:05 AM
Thanks my friend it was clasic Bosch BDM port.
So I will attach flash dump, hope that someone can help.
BIG THANKS!

kgb20
16th March, 2013, 11:38 AM
Thanks my friend it was clasic Bosch BDM port.
So I will attach flash dump, hope that someone can help.
BIG THANKS!

BMW X3 DPF off

tihiuvek
18th March, 2013, 10:17 AM
ECU has been instaled in car and works for now (It is under test and I will have info back on next Friday)!
BIG THANKS!

tihiuvek
20th March, 2013, 12:53 PM
As I got plenty of demand for these file and I am not the owner + I do not have confirmation yet, please contact member KGB20 for pass!
I repeat I do not have authorization to share pass.

tihiuvek
6th August, 2013, 09:07 AM
So, today I received car back and it has smoke on eghsaust pipe!
DTC P14A2 i P14A6 (DPF pressure sensor).
Does somebody know same solution for these problem.

786mo
6th August, 2013, 10:48 AM
Sensor fault.

ecutuners
6th August, 2013, 11:07 AM
Proper solution not need any sensors connected ;)

tihiuvek
6th August, 2013, 11:14 AM
I been reading for same "HYBRID" solution! Strange that these error was not present before.
Is there any software modification possible as Ecutuner said?

786mo
6th August, 2013, 11:48 AM
Yes there is, proper manual solution requires no sensors :)

tihiuvek
10th August, 2013, 05:26 PM
To be honest I am thinking to buy Swiftec.
On they web page they declare that no problem with EDC16 bmw.
Is there somebody who can try to clear my dump in order to test?

kevfield
10th August, 2013, 06:00 PM
Test and report pass PM

Thanks kev

tihiuvek
12th August, 2013, 10:03 AM
I can confirm that with your file there is no any DTC!
Unfortunately I found same oil in exhaust pipe and I am trying to discover is turbo or something else.
Big THANKS to all for your effort.