View Full Version : stilo read 912 with xprog need connections
ninja123
15th March, 2013, 05:33 PM
Can anyone tell me how to read this mcu from fiat stilo BSi with xprog?
Thanks in advance, ninja
DashProg
15th March, 2013, 06:48 PM
use bdm adaptor for xprog
davorOS
15th March, 2013, 07:07 PM
like this but I prefer UPA
igorr
15th March, 2013, 07:14 PM
what mask of mcu
janusz21
15th March, 2013, 07:46 PM
tray this:laugh::laugh:
ninja123
16th March, 2013, 09:32 AM
tray this:laugh::laugh:
What is this mate? I didnt ask for a file??
ninja
ninja123
16th March, 2013, 10:00 AM
what mask of mcu
3K91D
thanks, ninja
janusz21
17th March, 2013, 10:31 PM
tray this:angel:
ninja123
18th March, 2013, 08:23 AM
only 4 connections for this mcu??
Have you tried this way with success?
ninja
yellowstilo
18th March, 2013, 11:10 AM
yes, this works - picture is mine.....
janusz21
19th March, 2013, 06:12 PM
Yes, this picture its Yellowstilo work ok XPROG
ninja123
19th March, 2013, 08:29 PM
will this work for every stilo bcm mcu mask? or only for this mask?
ninja
yellowstilo
19th March, 2013, 09:03 PM
this will probably work for all DG128 mcu's in Stilo bodycomputers - the PCB with the DG256 mcu has a different layout.
ninja123
20th March, 2013, 08:59 AM
do you have a connection diagram for this one too?
thanks, ninja
yellowstilo
20th March, 2013, 04:44 PM
this is the Alfa 147 version - afaik it's the same as the Stilo DG256 body computer...
simaservis1108
17th December, 2014, 11:03 PM
Connections don't work for 5H55W mask,just tried it.
philipcoin
17th December, 2014, 11:27 PM
Hello m8,
Please i need help to read vw beetle cluster with xprog
Mc68hc912d60http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=291310&stc=1
viw9419
18th December, 2014, 04:12 PM
. . . . . .
simaservis1108
18th December, 2014, 06:42 PM
Care with AVDI,your customer might have to refuel later.
Happened to my friend on Alfa Romeo GT.
Fuel gauge wouldn't work until he went to refuel again.
Atex31
18th December, 2014, 08:33 PM
You need to disconnect the power supply after reading the BSI.
That will reset the fuel gauge.
viw9419
18th December, 2014, 08:39 PM
. . . . . .. . . . . .
igorr
18th December, 2014, 08:51 PM
See, easy when you know how.
yes everithig is easy when you know
igorr
18th December, 2014, 08:59 PM
Hello m8,
Please i need help to read vw beetle cluster with xprog
Mc68hc912d60http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=291310&stc=1
whay dont you yust conect on mcu directly you have it in xprog manual
simaservis1108
18th December, 2014, 10:48 PM
I didn't mean whole dash not working,only fuel gauge.
I know what you mean by reset.I watched videos...
pezao
18th December, 2014, 11:22 PM
291473
Conection Marelli
simaservis1108
23rd December, 2014, 08:15 PM
I tested today and 5H55W and 3K91D both working.
Strange.
ninja123
23rd December, 2014, 09:03 PM
@Ninja,
You have Fiat on AVDI? It just pulls the dump straight out.
not on all, it has failed several times.
and check the date on my post you are refering to, avdi didnt have fiat then :)
ninja
viw9419
24th December, 2014, 07:55 AM
. . . . . .
DottoreBL
24th December, 2014, 09:44 AM
Ninja, here u r, I read Fiat Stilo with 1K79X mask read with Xprog
https://www.dropbox.com/s/yb15w1qdgq4a677/Photo%2009.12.14.%2015%2057%2011.jpg?dl=0
PURPLE-BKGD
WHITE-GND
RED-VDD
YELLOW-RESET
ninja123
25th December, 2014, 12:21 AM
thanks mate, but please check the date of previous posts :)
merry xmas
ninja
DottoreBL
25th December, 2014, 09:18 AM
hahahaha :D
sorry
bamsss
30th January, 2020, 02:43 PM
upa and jtag read this mask but you must choose in upa mc69hc912dg128a not mcs912
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.