PDA

View Full Version : magpro2 ERROR- help me --



mauronow
17th March, 2013, 08:27 PM
Hello friends! I have this problem with my mag pro, and I can not fix it.
could help me? someone did the same? It's the same with all ECU.
thank you very much! I hope your help.:dontknow:

camil
17th March, 2013, 09:15 PM
If you have ori tool contact magicmotorsport people, they would help you.

This same problem i had with a friend's Xsara Picasso 1.6 16v 120hp with ME7.4.5 and fgtech. It Ids the ecu perfectly then seedkey error. Must try bootmode next time.

carmageddon
17th March, 2013, 09:40 PM
kess1 (magpro 4.2) and fg2 dont have boot mode for ME7.4.4 but have boot mode for ME7.4.5 (not usable)

only kess2 and other original tools have this function.

no way for R-W by OBD with invalid key problem

camil
17th March, 2013, 10:38 PM
By (not usable) you mean the bootmode for ME7.4.5 is listed on the fg2 software but is not working?

carmageddon
17th March, 2013, 10:52 PM
yes...ME7.4.5 have ST10FXXX while ME7.4.4 have siemens C167 inside...the driver for ST in not compatible with C167 for different flash setup (internal for ST and external for C167)

camil
18th March, 2013, 12:06 AM
Then i understood you the wrong way, sure if processor is different boot mode would not be compatible.

I thought you were telling the me7.4.5 implementation in sw were broken and didn't work for the me7.4.5 :) Thanks for explain.

mauronow
18th March, 2013, 01:33 AM
I always make it perfect for obd 7.4.4 bootmode ever. This problem happens to me all the ecu.
thanks

camil
18th March, 2013, 12:03 PM
Mauro, your tool is the original one or a clone?

gezame
18th March, 2013, 01:45 PM
Mauro, your tool is the original one or a clone?

Hi
Magpro V4.2........
I think clone friend.
Br.

camil
18th March, 2013, 02:04 PM
Then better not to contact magicmotorsport :)

I think someone posted here time ago an updater for the magpro, maybe that solve the problem.

carmageddon
18th March, 2013, 02:36 PM
i think so : whoever have official tools don't goes on forum for solve her HW or SW problem...magicmotorsport is always helpful.
i think also that the screen with error was positioned them for cover serial code of tool....because the error screen is always at the center

without offense mauronow :-)