View Full Version : need pincode renault megane
hafido1983
18th March, 2013, 02:56 PM
hi guys
i need pincode renault megane
hc05B32 (0D60J)
THanks
hafido1983
18th March, 2013, 03:08 PM
any help please
gwee
18th March, 2013, 03:10 PM
Renault Pin Extractor, hope it help m8
KILL_THE_IMMO
18th March, 2013, 03:15 PM
CORRUPTED DUMP READ IT AGAIN
hafido1983
18th March, 2013, 03:15 PM
i need code pin ...? i test but gives message (invalid format)
KILL_THE_IMMO
18th March, 2013, 03:25 PM
TRY TO FIND PIN FROM PRCODE STORED IN KEY LABEL
hafido1983
18th March, 2013, 04:06 PM
this read it well
alfabit
18th March, 2013, 04:15 PM
Also bad reading.
gwee
18th March, 2013, 04:20 PM
If reading is good, just use the above extractor.
hafido1983
18th March, 2013, 04:23 PM
I READ it by hc05b32
AND hc705B32
MASK 0D60J
fear_dark
18th March, 2013, 04:25 PM
0D60J = MC68HC05B16 !!!!!!!!!!!!
gwee
18th March, 2013, 04:29 PM
try this m8.
hafido1983
18th March, 2013, 04:39 PM
0D60J = MC68HC05B16 !!!!!!!!!!!!
I READ it by hc05B16 but the same hc05B32
hafido1983
18th March, 2013, 04:41 PM
try this m8.
doesn't want read it
only mask 0D60J
fear_dark
18th March, 2013, 04:54 PM
read xprog-m or
http://www.etlweb.com/prod_prog_mc68hc705b16/files/mc68HC705x32_opg.pdf
hafido1983
18th March, 2013, 05:10 PM
my file as like this link
http://www.digital-kaos.co.uk/forums/f178/pin-cood-uch-megane-mc68hb32-0d60j-322196/
fear_dark
18th March, 2013, 05:16 PM
my file as like this link
http://www.digital-kaos.co.uk/forums/f178/pin-cood-uch-megane-mc68hb32-0d60j-322196/
ok read xprog-m
hafido1983
18th March, 2013, 05:23 PM
yes i read it by xprog-m
hafido1983
18th March, 2013, 05:24 PM
i read it by xprog without problem
fear_dark
18th March, 2013, 05:26 PM
maybe a few try verify 3 4
hafido1983
18th March, 2013, 05:28 PM
ok thanks i think no solution
ngakson2002
18th March, 2013, 05:36 PM
Renault Pin Extractor, hope it help m8
Have the following error when trying to start the soft
fear_dark
18th March, 2013, 05:40 PM
upa try read?
gwee
18th March, 2013, 05:43 PM
Have the following error when trying to start the soft
Hi m8,
Your PC need the required dll file, google and download.
The soft is working fine.
scanvec
18th March, 2013, 06:55 PM
Your dump is corrupted
hafido1983
18th March, 2013, 09:37 PM
ok can you give me code pin for this file
Bishop c4
19th March, 2013, 12:00 AM
ok can you give me code pin for this file
hi, invalid file
Regards
Lamparita
19th March, 2013, 12:13 AM
Hi.
Key Label: SAA3E
Security Code: 9749
Best Regards.
Lamparita.
hafido1983
26th March, 2013, 01:27 PM
Hi.
Key Label: SAA3E
Security Code: 9749
Best Regards.
Lamparita.
thanks very much
your code is correct
you're star
scanvec
26th March, 2013, 03:47 PM
it's not from dump but greet .
Well done
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.