PDA

View Full Version : WORKING PIASINI CLONE



pablo1971
18th March, 2013, 08:04 PM
can anyone recommend were to get a working piasini from please..

ducatisti
18th March, 2013, 08:38 PM
can anyone recommend were to get a working piasini from please..

I also want to know where to get one.

I got a silver one comming in a few weeks. they tried sending me a black unit i said no.

Does anyone have a black unit that actually works ?

pablo1971
18th March, 2013, 08:44 PM
fingers crossed you get one that is working....

kevfield
18th March, 2013, 08:48 PM
The black unit i have works with jtag only, 16v on flash pin only has 4v :-(

Thanks kev

z786
18th March, 2013, 09:54 PM
i have silver 1

iv told u to use obdcartool mate

pablo1971
18th March, 2013, 10:10 PM
done a few tests on it,and also a re flow but no good...this one is for the bin

z786-cheers mate,will get one on order

kennfeld
19th March, 2013, 01:17 PM
i have versions that work but no more use them since i buyed genuine

technobox
19th March, 2013, 01:22 PM
i have piasini clone master black one working good

8k65m
19th March, 2013, 02:02 PM
kevfield (http://www.digital-kaos.co.uk/forums/members/66397-kevfield/) "The black unit i have works with jtag only, 16v on flash pin only has 4v :-("
How did you check? You pressed the button "identification"? What is the voltage on the red wire?

pablo1971
19th March, 2013, 07:54 PM
the one i have dosnt reach the 16v..this is the black box type.

kevfield
20th March, 2013, 01:55 AM
kevfield (http://www.digital-kaos.co.uk/forums/members/66397-kevfield/) "The black unit i have works with jtag only, 16v on flash pin only has 4v :-("
How did you check? You pressed the button "identification"? What is the voltage on the red wire?

select car hit read check volts and you should see about 16v

If not no good

Thanks kev

8k65m
20th March, 2013, 06:53 AM
What is solution of low voltage to the red wire?
Regards.

ducatisti
10th April, 2013, 12:45 PM
The black units are a pile of shit and sellers should be aware and not sell them.

I have 2 x units here and they do make 15v but still do not work. also the jtag wires are reversed on the flat cables.

All people i know 2 years ago buy the silver version and they worked fine

kennfeld
10th April, 2013, 02:01 PM
black versions work also fine ...

2xded
10th April, 2013, 02:51 PM
What external voltage you filed for Piasini?

pablo1971
10th April, 2013, 08:44 PM
i had a black one----programming voltage was way off the 16v.....and as we speak im waiting for a new one arriving..

ducatisti
11th April, 2013, 12:04 AM
How can black versions work fine when

I bought 2

I know someone who bought 2

I got sent 2 today to test

And everyone here are saying they are shit

Maybe a professional can fix them but to an ameture being sent a black unit that doesnt even have the flat cable connected the right way round is ajoke...lol...

Bring back the original euro clone.

If anyone have a guarenteed working supply of arond 3 units contact me

2xded
11th April, 2013, 06:26 AM
i had a black one----programming voltage was way off the 16v.....and as we speak im waiting for a new one arriving..

Thank you.
You write about the voltage of the external power supply "16v..." or the voltage on the wire permits programming?
I asked about the external voltage. If I connect an external 12 V, I get a red wire voltage 10.5V.
Regards.

poxxxy
16th April, 2013, 04:10 PM
I'm waiting to try out my Piasini black clone on an ECU... I wonder if I will have issues :(.

2xded
20th April, 2013, 05:08 PM
I need manual to connect Piasini with ECU 5WY5908A Sirius D42A. If it is possible.
Regards.

Wiring Diagram: 24,28 - massa, 30,29 - 12 V, 56 - K-line.
Closed during the connection leg 1-4 CPU to ground through a resistor 6.8 kOm.

pablo1971
20th April, 2013, 07:01 PM
i have just received my piasini back from repair.i will get to test it in the next couple of days and post the results...

pablo1971
24th April, 2013, 10:55 PM
good news....my piasini back from supplier,and at this moment-k line programming is working 100%----just need to test the j tag now.:laugh:

maglaras
25th April, 2013, 08:05 AM
for K-LINE of piasini only need the 9241 and work ok

pablo1971
8th May, 2013, 09:06 PM
just got my piasini back.and so far its all working good....k line is ok...just need to try it on ktag.

m3evo
9th May, 2013, 08:37 PM
just got my piasini back.and so far its all working good....k line is ok...just need to try it on ktag.

Keep us informed!

pinotec
24th October, 2014, 01:09 PM
I have a problem with piasini, I can't write sirius32, time out ecu error do you know why?