Read pin code in Motometer B00???

[Rito]

Someone can what tool can read pin code in Dashboard Golf4 Motometer B00 ??
I need tool only for this dash...

Vag-commander 3.6 and 1.4 not read.
Vag dash 5.14 not read too..

Maybe it?
VAG PIN READER (http://www.ecutool.com/VAG-PIN-READER_937.html)

or it??
VAG KEY LOGIN (http://www.ecutool.com/VAG-KEY-LOGIN_1455.html)

Thanks

[ammarben]

SBB
VAGeeprom programmer

[Rito]

SBB
VAGeeprom programmer


Forget SBB...VagEprom programer not try, But maybe not read.
Work Kkl interface??

[yugo45]

Someone can what tool can read pin code in Dashboard Golf4 Motometer B00 ??
I need tool only for this dash...

Vag-commander 3.6 and 1.4 not read.
Vag dash 5.14 not read too..

Maybe it?
VAG PIN READER (http://www.ecutool.com/VAG-PIN-READER_937.html)

or it??
VAG KEY LOGIN (http://www.ecutool.com/VAG-KEY-LOGIN_1455.html)

Thanks

Vag dash com can do it or
Open dash read chip direct , use NYO4.

[Rito]

Direct I Know, I done it direct a lot....
But I need tool can read without dissemble.
are you sure vag dash com can do it??

[tiguan]

VAGeeprom programmer with Kkl interface

[yugo45]

Direct I Know, I done it direct a lot....
But I need tool can read without dissemble.
are you sure vag dash com can do it??
Yes , but for Bosch Dash sometimes takes long time to read.

[Rito]

Today try vag-tacho.. try search login but no sucess..
Any tool read pin code Motometer B00 ok??

Thanks

[Fallen]

Everybody says that it can be done by OBD but I have never seen it done.

Look for one of my posts from about a month ago, I posted connection diagram from back of PCB.

[pepi]

I do it always with AVDI, but it takes time to calculate.

[javyb]

Vag tacho might read it

[pepi]

Lately I had Golf4 with MM dashboard 1J920805G BOO, I have try with many interfaces without succes. Costumer told me that he dosent want to be opened his dashboard. I plug AVDI and after 45 min security pin was found.

[Rito]

Lately I had Golf4 with MM dashboard 1J920805G BOO, I have try with many interfaces without succes. Costumer told me that he dosent want to be opened his dashboard. I plug AVDI and after 45 min security pin was found.

Like me.. But I know have cheap tool for it.. I have too original AVDI but not full for VW...

Thanks

[antibisic]

kkl interface is enough done many of them

[lupu_sandu]

Hmm, maybe i'm lucky, but last two B00 dash with xcan pin found in ...2 seconds :)

[Rito]

kkl interface is enough done many of them

I will test but what software must use??

Thanks

[lupu_sandu]

Vag eeprommer 1.19

[Rito]

Hmm, maybe i'm lucky, but last two B00 dash with xcan pin found in ...2 seconds :)

What tool is it?made where???
can put here web is made??

Thanks

[lupu_sandu]

SMOK (http://www.smok.com.pl/index.php?lang=pl&id=oferta&kategoria=1&produkt=55)

[Rito]

Vag eprommer 1.19 not work too..Try in all menus but
Not have option for Motometer B00
199715

Any other cheap software can do??
Thanks

[kire106ka]

Hmm, maybe i'm lucky, but last two B00 dash with xcan pin found in ...2 seconds :)
Not lucky that tool is fast sometimes 2 sec are long time:welcoming:

[Rito]

Today try again Vag-tacho and read pin code in B00 Dash...
So Don?t understand why only read sometimes...

[einet]

Change Regulator

[Rito]

Change Regulator

try again in other car whit Vag-Tacho 3.1 in VW Bora Motometer B00 can?t read pin again...
Change it in vag tacho hardware??

[Rito]

Vag eeprommer 1.19

Can you post here Vag eeprommer 1.19 I only have 1.18 and not found 1.19..

Thanks