ALFA ROMEO CHANGE ECU USED AND PAIRING

[achaccha]

Hello friends
I need your help to install a ecu used in an Alfa Romeo.
the original ECU is damaged, the customer has gotten a used ecu.
Please could you tell me what is the procedure to match the ecu immo?.
BCM has been reviewed and the key is engraved and is recognized by the immo, the only thing missing is that reconosca the engine ecu.
Thanks for your feedback

[Meat-Head]

Cool word on street says loook for the rather large thread about something simulsr

Look at my photo albumbs for the link

[euroscan]

- make immo-off for this ECU 0261 206 708.

[achaccha]

Thank you very much for your help dear friend. please i need to know what is the memory that should be read on the engine ecu? and what is the connection diagram?
please can you tell me that herramnienta should use for this reading? I have UPA, XPROG, ORANGE.
Thanks for your help

[antwnhszr]

my friend hi... you can't read this ecu with these tools who have..only with mpps or byte shooter.or another flasher tool

[euroscan]

- specify the type of car, the ECU software versions of the new. - this is 105CV, 120CV or 150CV Alfa Romeo 147 ?... - you need to have the file immo-off and the original file for this version of the ECU.... - I usually I use to read and save the file to the ECU, the Galletto 1250/1260.

[Meat-Head]

http://www.digital-kaos.co.uk/forums/members/81877-meat-head/albums/testing/187494-me31me731me73h4-edited.jpg

http://www.digital-kaos.co.uk/forums...1/index17.html (http://www.digital-kaos.co.uk/forums/f178/fiat-me73h4-virginise-immo-off-149031/index17.html)

http://www.digital-kaos.co.uk/forums...ml#post1656661 (http://www.digital-kaos.co.uk/forums/f178/alfa-romeo-147-immo-172377/index3.html#post1656661)

[achaccha]

187948
Thank you very much for your help buddy, can you please check if my connection is fine?
Thanks again

[Meat-Head]

leave pin 15 on the battery live and put a on/off switch on the rest

i did not bother with resistor on boot pin

boot pin then power if you don't have switch on ignition you loose the last bit of the dump

read them link above

[euroscan]

- add switch to power and to boot line.

[achaccha]

Thank you very much to everyone for their valuable comments and contributions.
I managed to do the ecu reading this Alfa Romeo 147, the file is attached to this.
Please could you help me match this ecu with immo?
what would be the procedure to match the ecu immo?
if i use the file immo off "Euroscan" is there any cable cut between immo and ecu?
Thanks for your help

[Meat-Head]

Well either leech the file i leeched in that other thread and use

or leech that file and compare. The one i fid started several times i think. But if unsure look at that list i leeched and cut Code wore

[achaccha]

Dear friends, I decided to put a file in the immo ecu out of this vehicle.
Can you tell me if I have to do extra work to start the engine?
that is, you have to cut a cable or disconnecting any component?
it is a funny thing has happened, I am comparing the file AcAV read, with the file you posted "EuroScan" in post number 3 and I see that is exactly like my.

Please help with a file to the ecu immo off 0261206708 and the procedure to start this vehicle?
Thank you for your help.

[KriptoKey]

You have to get a file with immo off to the engine computer 0261206708. otherwise it will not work.
Post your original file and I'm sure that will help friends solve your problem.

[achaccha]

Please friends my original reading is attached hereto. can please help me with a immo off to start the engine of this vehicle?

[euroscan]

- read ORI file from ECU, save. - make boot mode, write immo-off, restart ECU. - write ORI file, it is ALL. - in file look at adress 0x 10000, 0x10190 , 0x10880.

[Meat-Head]

Euroscan do you know how to make one a self coding vergin?

[euroscan]

- Unfortunately, I do not know the procedure for the 147 TS to make virgin self-coding file..

[achaccha]

- read ORI file from ECU ( Understood)

-save. (Understood)

- make boot mode ( I understand that you have to put the pin 20 to ground, is that correct?

- write immo-off (Understood)

- restart ECU. (I do not understand this part, as you have to restart the ecu? You mean open the contact to ON and OFF? Can you explain the procedure in this part?
maybe you mean start the engine but I'm working on my desk and I have no way to start the engine because the car is too far from here.

- write ORI file ( Understood)

in his post that has sent multiple files immo OFF. I have to choose the file that corresponds to 0261206708, we agree?

thanks for your help

[Meat-Head]

Ohhh that is going to be fun. Understand you have to crank engine for the immo off file to wipe the eeeprom
then reload orginal flash

if you have to mail ecu there and mail back again. Or just leave immo off file in thrn drive car back to your shop

[euroscan]

- please use 147 virgin flashe.bin. - this file is only for ECU eeprom to delete the information about the previous keys, so you need reset the ECU (ECU supply OFF-ON). - file-immo-off uploading to ECU car should not ride.

[achaccha]

Hello Friends.
I managed to start the engine of this vehicle, I have only one problem with the Automatic box. the shift lever is stuck in neutral and does not move to any changes.
will have something to do immo off work has been done?
thanks for your help

[Meat-Head]

Weird check stop lamps. If telespeed check has oil in the pump. SPECIAL oil

[treo]

Read the configuration of ECU.What gearbox is there?

[achaccha]

apparently the problem is in the wiring or the ecu to the gearbox can someone help me with the manual for this vehicle. especially the automatic gearbox.
Thank you for your help.
best regards

[Tuiken]

Good morning what engine, month and year of the 147?

[achaccha]

Good day friend
this vehicle is from 2000, Alfa Romeo 147, whose characteristics are found in the following image.
I hope someone can help me with the workshop manual automatic transmission.
thanks

[Tuiken]

i can noit see the model at the frame ! these are the 147 2.0 TS between 10/03 and 04/01 . if another model say regards