help to learn key suzuki xl7 dtc:system controller in leran mode

[elmaalouf]

hello friends pls i have a problem and i need help
t was tryting to progrum a key for vitara xl7 without success and after that cant enter program key on sbb
after trying to do diganostic for it i got
B3031 system controller in learn mode
plss help to know how to exit learn mode to can program the keys
thanksssss

[elmassioui]

post your 24c01

[elmaalouf]

24c01 from the ecu???

[keygargoil]

immo dump 24c01

[elmaalouf]

there is no immo there is only ecu and ring and in the ring there is no 24c01

[keygargoil]

look in the ecu 93c56
what keyblank are you using if hu133r then its id46 either aerial or ecu
if its toy43 then its a 93lc66a in the aeriial using 4d66

[key-maker]

Silca B111-PT i try it with tcode pro

[elmaalouf]

thanks friend but the problem is that my ecu is showin on launch ecu in learning mode and cant enter with sbb or any programer and on AVDI it show the is 396 dtcs (without descriptions for sure) but cant delete or reset
any help?

[key-maker]

I think it's is the same system like chevrolet equinox you need tech 2 with tis

[topkeys]

There is tech2 for suzuki? Or tis for suzuki?

[key-maker]

tis for suzuki

[elmaalouf]

hello friends
i am not able to solve my problem till now any help pls?
if i try to scan the car using launch it show ecu in learning mode and if i try using Abritus it show there is 362 dtcs :( and i am not able to delete thhe dtcs
any help pls ???

[large12390]

heelo
only remove ecu eprom 24c01 and immo in reing have eprom 93c66 this xar have chip 4d-66
will help u
regards

[elmaalouf]

hello friend thanks for ur answer what i have to do now? remove the 24c01 ? and the ring without any program?
thanks

[elmaalouf]

hello friends
there is no 24c01 in the ecu there is only 95080
attached the photos of the ecu and the dump of the 95080 inside may i can get help
thanks in advance

[AUTOREPAIR1]

I think your key is bad if this is a gm system I have had lots of gm s say thay are in learn mode with key bad try with new key switch ignition on and then back off then on to start key should program or you have wrong key

[elmaalouf]

hello friend i think its not the problem i tried another used key without success is there any immo off for this ecu or solution to start the car?
thanks

[large12390]

hello
sorry i thout u.r car its older than thiss
alsow in this model in ecu ther is 95080 and in the ring ther is 98040please post it her and this car work with chip 46 lock

[sogaro]

I have this car too, same ecu. The car was parked for over 2 years and battery went dead and now immo light flashes. Any ideas? Can MDI with SPS do this car?

[PCF]

i got this problem with an xl7 same car and tried all the way tthe better and easier solution was by removing the eprom from the ecu and car started normally

[sogaro]

Are you kidding me? That's really amazing!! My ECU is a Bosch and petrol, same as yours?


Sent from my iPhone using Tapatalk

[PCF]

no i al sure try and report and dint forget thanks button :)

[sogaro]

Worked like a charm. Though throttle not ok , guess that's some other issues on its own.


Sent from my iPhone using Tapatalk