SMOK Fiat tool & Renault ABS

[javyb]

Has anybody tried this tool on renaults with km stored in ABS module and does it work, does it block the synchro of ABS

[vokinn]

Done few lagunas with this tool its works by blocking synchro with abs and takes at least 20-30 min.

[Viliuxxx]

Done few lagunas with this tool its works by blocking synchro with abs and takes at least 20-30 min.

So why a separate function Renault ABS (Laguna, Megane, Fluence) KM Read / Write KM ?? if you reflash only dash?

[newgeniehex]

hello
i have this tool it work perfect
regard

[pierre renault]

Good day.
I have SMOK Fiaft Renault, but I'm not happy. burned two dash Megane 3, I went back to the original file and program appeared PROGRAMMING ERROR IN RED, not accept new programming had to buy another dash. takes 43 minutes to program a Megane 3, not the ABS program (flash the dash)

[vasa]

Hi,
SMOK Fiat tool & Renault ABS make only blocking synchro whit ABS . Only Reflash Dashboard. CHange km im ABS is impossible. You can show in Clip orig km in ABS. This work is useless. Only chance is to dismantle and remove the ABS

[iepower]

I also have this tool i have made some MEGANE 3 MEGANE 2 LAGUNA it reads dash flash detect and reflash it with block to abs than make mileage correction it takes 48 minutes

[euroscan1]

- Has anyone tried this program, read, write counter (dashboard) from alfa romeo Giulietta by OBD..

[Manuelgb]

hi
DP3 works like smok?
DP3 modified in the ABS?
regards

[Kprog]

No manuel, DP3 no cambia el abs. solo flash al cuadro..

[darius89]

carprog have that function, but didnt tried yet.
LITTLE SCARE.....

[kazikk]

You can do that :
put 999 999 in to dash - go for a ride 5 km - dash will copy mileage to ABS ( 999 999 )
then put new mileage in dash with Smok and block flash.

it always working for me :)

[nebojsapejcic]

You can do that :
put 999 999 in to dash - go for a ride 5 km - dash will copy mileage to ABS ( 999 999 )
then put new mileage in dash with Smok and block flash.

it always working for me :)

Kazikk, thanks for sharing this metod. After you drive 5 km in abs reads 0-5 km, right? Do you use option to reflash dasboard (45min) or you can just do dash since abs is lower value? Please explain

Thanks!

[gepakg]

no he mean that with clip you didnt see real milage,only 999999...in abs

problem is about damaging flash and problem to recover it

regards Gepa



Kazikk, thanks for sharing this metod. After you drive 5 km in abs reads 0-5 km, right? Do you use option to reflash dasboard (45min) or you can just do dash since abs is lower value? Please explain

Thanks!

[Manuelgb]

hi
If you change dash by obd 999,999. the ABS is amended to 999,999?
as psa (dash and bsi)
regards

[kazikk]

once you change dash to 999 999 - in abs stay forever 999 999.

with Smok you can change mileage in dashboard by OBD and program new flash,
dashboard don't read mileage from ABS any more.

[MarceTK]

X-TOOL PRICE LIST 1.950 EUROS IS BEST TOP
FLUENCE Jonshon Control Dash & ABS (read/write KM, read/write Flash by OBDII)
CLIO III (24c04)read/write KM by OBDII

[peko]

also in ecu you trace ori from dpf info ;)

[cokolo]

X-TOOL PRICE LIST 1.950 EUROS IS BEST TOP
FLUENCE Jonshon Control Dash & ABS (read/write KM, read/write Flash by OBDII)
CLIO III (24c04)read/write KM by OBDII
SMOK also read /write flash by OBD but don't change km in ABS and X-Tool change km in ABS or only flash dashboard like all interface (Smok,Dp3,Avdi....) ??? Did you try after km change look with Renault diagnostic in ABS module odometer value ?

[solitaire]

SMOK also read /write flash by OBD but don't change km in ABS and X-Tool change km in ABS or only flash dashboard like all interface (Smok,Dp3,Avdi....) ??? Did you try after km change look with Renault diagnostic in ABS module odometer value ?


today all devices flash dashboard.

[peko]

if you flash dash, in abs you can trace ori
but if car is updated in renault office, synchronisation abs/dash come back ?

[tziku]

When i reflash a Megane 3 dash with OEM Carprog at the end of writing flash i have "Write error". I try to put what i read , it's succesuful writing but dash is still dead. I think carprog read corupted flash. I write to codecard and no answer.
My Megane is 2009 1.5dci.
Now I need a flash file.

I add what i read.
249330

Thanks.

[peko]

hi friends

using smok/abs VDO laguna 3
no made dash mod
and dash died ....
i test rewrite memory data but dash always died

so using abs you flash dash ... so if car go to office updating dash, sure ori come back from abs

so now i'm looking for sw flash from dash lol ( i prefer as sw abs )

;)

[didi_du_93000]

Or take a DP4 from ELprosys.

Write real mileage inside ABS for ALL RENAULT / DACIA!!!

[josema00]

Dp4 not read write ABS module,only block the dash.Now you have smok whith new update read write ABS in new renault dacia.

[kioji41]

Dp4 not read write ABS module,only block the dash.Now you have smok whith new update read write ABS in new renault dacia.

DP4 read and write ABS module long time before Smok and can make much more cars including Dacia ABS and Renault cars that Smok not have in menu yet.

[peko]

DP4 read and write ABS module long time before Smok and can make much more cars including Dacia ABS and Renault cars that Smok not have in menu yet.

dp4 lock synchro ABS/dash and never mod ABS modul !
you can check it, when you write abs module, before unplug dash ;)
you will see not communication ...

[wadim21]

someone tried read mileage in ABS after correction DP4 or smok?

[Landetos]

someone tried read mileage in ABS after correction DP4 or smok?

recently we have tested to make wit DP4 - 2 Megane IV + 1 Talisman + 1 Scenic dashes and guess what?

the info was UNKNOWN VERSION in all 4 of them...coincidence or lack of software?

no need for ABS if you dont even have the speedo versions supported...i supose...:dancing:

[pierre renault]

ABS OBD FOR DP4

1 MEGANE IV OK
SENIC 3 0K
CLIO 4 OK
MEGANE 3 ALL OK

[andro822]

i also tryed dp4, i made clio 4, megan 3, senic 3, megan 4 - all OK. Checked than with clip, and new mileage is in ABS. So DP4 correct mileage in ABS!! (flashing about 20min)

[peko]

no clip take mileage from dash
after lock synchro dash / ABS, if you made update dash, ori come back ...

[andro822]

no clip take mileage from dash
after lock synchro dash / ABS, if you made update dash, ori come back ...

you dont know what are you talking! im not talking about making blockade in clusters flash, but about flashing ESP via OBD and resetting mileage! if u make blockade, in clip under asp u get old mileage, with dp4 solution all is ok. flash in cluster stay original!

[javyb]

no clip take mileage from dash
after lock synchro dash / ABS, if you made update dash, ori come back ...Do you own DP4? If not I suggest you not comment about what it can or can't do

Sent from my SM-G950F using Tapatalk

[sean us]

confirm dp4 work 100% i was programmed over 30 megane 3 scenic 3 and checked mileage with diagnose it all ok and work fast.

[josema00]

I make renault abs with dp4 3 month ago and read abs under clip and show the original value,only block syncro dash,the smok the same,only smok write abs after 02/2018 new update.dp4 posible now.

[cokolo]

Smok write new mileage in ABS by obd in Megan 3 , Laguna 3, Scenic 3 (license RT0020) and Renault Trafic IV (RT0019) that's new option not only flashing dashboard . After work ABS by OBD with Smok UHDS you can check with diagnostic tools and you can see new mileage in ABS

[peko]

Smok write new mileage in ABS by obd in Megan 3 , Laguna 3, Scenic 3 (license RT0020) and Renault Trafic IV (RT0019) that's new option not only flashing dashboard . After work ABS by OBD with Smok UHDS you can check with diagnostic tools and you can see new mileage in ABS

no, smok lock synchro flashing dash
ori always in abs, you can trace it reading abs after job ;)

[javyb]

no, smok lock synchro flashing dash
ori always in abs, you can trace it reading abs after job ;)No your wrong. Sure some if u guy cant read. New update programs abs

Sent from my SM-G950F using Tapatalk

[denzl]

Smok can do it...

http://smok.com.pl/index.php?id_product=380&controller=product&id_lang=2&search_query=Renault+abs&results=13

i have uhds full, but I did not try...they promise they can