Galletto 1260 obd

[pandokrator]

today i try to read one truck Man TGA 4/6 E2 with bosch MS6.1
with obd galletto_1260
prog ask a 24V adapter or disconnect one of the batterys !!!
of course with second method i haven't power in the truck so no power to ecu..:stupid:
i try google for any adapter about but without luck.
any experience with 1260 and trucks ?
thnx

[pandokrator]

only solution is a bench ??
:vroam:

[Meat-Head]

something like this

Lucas LS900 24v to 12v electronic voltage dropper | eBay (http://www.ebay.co.uk/itm/Lucas-LS900-24v-12v-electronic-voltage-dropper-/181103081558?pt=UK_CarsParts_Vehicles_CommercialVe hicleParts_SM&hash=item2a2a95b856)

but if it was me i would cut the pin 16 battery live off the OBD socket then

a) Connect to first battery positive

b) get a jump battery ground neg and use the positve to power tool

[pandokrator]

thnx for reply my friend.
i think must modified my galletto with external power converter-supply.
have buy all adapters for trucks and i have the same prob with all of that.
thnx again

something like this :
188444

[Meat-Head]

yes that will be good - for what they cost buy another interface and convert to 24 volt and paint it red or something

[kire106ka]

Nobody work with trucks with that tool biy galletto 2 eu and you will do the job gall 1260 is not made for that kind of job.

[Meat-Head]

Thats an afterthough be no lorrys to select in software
unless can select edcxxx as something else

[pandokrator]

Gal it's a cheap tool but is a good for edc ecus like MAN or Temic for Actros trucks.
Meat-Head idea is good for modified a second gal part 24V.
bR

edit
and i inform here,after connect with galletto in truck obd
then the unit damage from overvoltage :deal:
now my galletto is for recycle :laugh:
lets buy other two