View Full Version : 2011 Jaguar XF Smart key programing-ALL keys Lost
crashcar
26th March, 2013, 11:36 PM
Hello.Please ,can anybody guide me thru programming smart keys for 2011 Jaguar XF.Using JLR.Can't figure out.Any inputs highly appreciated.
kevfield
27th March, 2013, 12:03 AM
Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......
Hope this helped
Thanks kev
Dashcoder
27th March, 2013, 12:48 AM
Hi
this tool can program your key even if all keys are lost .
Best Regards
Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......
Hope this helped
Thanks kev188439
gwee
27th March, 2013, 06:36 AM
Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......
Hope this helped
Thanks kev
Hi Kev,
Thanks for the good info.
Adamon777
3rd October, 2018, 01:40 AM
HI!
I have official SDD and try to programming (all key lost) new key like your instruction, but car request ignition ON, how use SDD when all key lost?
robarco
25th December, 2019, 05:52 AM
The same.
Im use option add key in SDD v 158
And as a result, I now have a problem with IMMO.
Shows me
PID C124: bytes 1-4; bit 3=0
Run "Immobilisation fron security menu etc....
after executing the command:
I can lock and unlock car Thats all.......
Information on dash "Sterring Column Lock " (Column is not locked)
No chance to start ignition ??
Any tip how to fix this
sleepyrz
25th December, 2019, 12:58 PM
Pay to play
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.