SPRINTER 211 START ERROR PROBLEM

[ChipDoctor]

Hello guys

I have one ecu and immo from sprinter 211
BOSCH 0281010524 A 6111533779 (5P08C3)

IMMO TEMIC 0265451732 (with QFP64 mask:0J66D)

key: DATA: C1059AC18B0D44D9
TYPE: 12 TEMIC WR (read with ZedBull clone)

The problem is the start error on dash.
Repair the dump from ecu and immo with (Mercedes Sprinter Vito Start ERROR 1.3) but the engine no start.The same problem again
No difference after repair the file the display show me the same problem
The car has one key and is simple without buttons
The car is about 100 kilometers away from my home

Can someone help me with a safe solution please???

Best Regards!!!
188491

[mercis]

first check hw problem,after writte dump

[ChipDoctor]

what is "hw"

[datapage]

hardware,
electrical wiring, immobox

[ChipDoctor]

You have information to give me?

[ChipDoctor]

One help to repair this problem guys....

[centrohifi]

install emulator! 5 min and motor switch, remove the IMMO BOX :)

[ChipDoctor]

If you have link for emulator send me please

Regards!!

[zoyzoyni]

start eeror repair didnt repair cause ecu lost more data.renew ecu and adapt with star.work always for me.first check immobox when is on the car you ust have two pinout with 12v+.if no immobox is off.

[ChipDoctor]

Thanks my friend

[centrohifi]

search on Google -... EcuVonix.com Solutions (http://www.ecuvonix.com/) ... or https://carlabimmo.com/

[ChipDoctor]

search on Google -... EcuVonix.com Solutions (http://www.ecuvonix.com/) ... or https://carlabimmo.com/

If you tell me about for emulator i know
I'm asking whether I can fix this WITHOUT emulator or star diag

[centrohifi]

fast solution or emulator, or align with Star 3 :)

[ChipDoctor]

fast solution or emulator, or align with Star 3 :)

i'm looking now on the internet for emulator but i don't understand why does not work after the repair of the dumps I did with (Mercedes Sprinter Vito Start ERROR 1.3)

No difference the display show me the same problem "START ERROR"

[amaflo]

Hello guys

I have one ecu and immo from sprinter 211
BOSCH 0281010524 A 6111533779 (5P08C3)

IMMO TEMIC 0265451732 (with QFP64 mask:0J66D)

key: DATA: C1059AC18B0D44D9
TYPE: 12 TEMIC WR (read with ZedBull clone)

The problem is the start error on dash.
Repair the dump from ecu and immo with (Mercedes Sprinter Vito Start ERROR 1.3) but the engine no start.The same problem again
No difference after repair the file the display show me the same problem
The car has one key and is simple without buttons
The car is about 100 kilometers away from my home

Can someone help me with a safe solution please???

Best Regards!!!
188491

try these files

[Min2xx]

Write to ECU and car will start :) Tested!!!

[masmiquel]

Write to ECU and car will start :) Tested!!!

Hi , i have the same problem, is posible to send me pw for file?

Thanks.

[Min2xx]

Hi , i have the same problem, is posible to send me pw for file?

Thanks.
You must post your original and I can make "start ready" dump

[masmiquel]

You must post your original and I can make "start ready" dump

Attached original files.

I have a question too. When i repair this files with MB sprinter/vito start error 1.3 what?s the problem? the vehicle not start and cluster follow with start error, what is follow step? match ecus?

Thanks in advance.

[mercis]

maybe immobox death,coil ,wire,key chip

[Min2xx]

Your virgin dump, ready to start. Make "lock to car" with DAS and thanks to MERCIS!

[masmiquel]

Your virgin dump, ready to start. Make "lock to car" with DAS and thanks to MERCIS!


This is great, but my problem is that i haven?t got DAS. Thanks in other form. Regards.

Problem solved with emulator.