ecu edc15c2 swap

[moky]

hi,i have an ecu 206hdi edc15c2 (3 plug) dead and i have one ecu from 306hdi (not same software) ,can i put 29f400 and 5p08 from one to solder on other? it's possible to swap and car run fine ? or just change 5P08 for immo? Many thanks

[Shmortz]

the best is to make new ECU virgin and resync with BSI ...

[marusca]

if the ecu original and second hand are same hardware you can swap the chips like you say...

[moky]

Thanks,ecu number and software are different,hardware same,edc15c2 3 plug..

[camil]

Then swap flash and eeprom and enjoy :)

[moky]

Ok Thanks Men !

[mirovasi]

Hi moky did this solution work.I have similiar problem