Xsara Picasso 2002 1.8 16v BSI problem

[Joxer]

Hi,

I have an problem with the BSI i think, after trying too change the NEC BSI i only get ------
Not showing any milage. I double check the DASH thats ok.

So i think i messed up the bsi.
Somebody know how i can correct this error?

car starts fine but is not showing any milage or the indicated speed.

REF Valeo: 73005812
REF DAF: A11896
REF SYLEA 142 790
REF PSA: 96 424 094 80
02/185/A
BSI-BOITE B6
HARD PR4
SOFT V8.2

Any help is welcome
thanks

[fuktak]

Upload your dump

[drahtman]

Hi,

I have an problem with the BSI i think, after trying too change the NEC BSI i only get ------
Not showing any milage. I double check the DASH thats ok.

So i think i messed up the bsi.
Somebody know how i can correct this error?

car starts fine but is not showing any milage or the indicated speed.

REF Valeo: 73005812
REF DAF: A11896
REF SYLEA 142 790
REF PSA: 96 424 094 80
02/185/A
BSI-BOITE B6
HARD PR4
SOFT V8.2

Any help is welcome
thanks

Double check the resistors where you soldered the wires near the NEC Processor. If your soldering was too long or too hot the resistors are dead. Try to measure resistors with ohm meter. Best Regards, Drahtman