PDA

View Full Version : Can anyone on here BDM read me my ecu Siemens PPD1.2.. Had bad write! S.Yorks



davsmith64
1st April, 2013, 09:31 PM
Hello All,
Can anyone on here help me.. I need my ecu BDM reading & flash Write.. I have a good flash to write however a file has been flashed to my unit and not been checksum and now wont read! I live in South Yorkshire,. I dont mind traveling or paying.
Regards Dave

elangel0001
1st April, 2013, 10:20 PM
indicates the hardware and software of the control unit.


regards

davsmith64
1st April, 2013, 11:48 PM
What do you mean?

m3evo
2nd April, 2013, 12:29 AM
What do you mean?

He is asking for the hardware and software numbers of the ecu. Although I don't know why as you have already said you have a good flash.

davsmith64
2nd April, 2013, 07:32 AM
2007 Audi A3 2.0 TDI 170
Siemens PPD 1.2
SN1L40SN1L4
03G906018DN

thanks

pepeoi
2nd April, 2013, 11:27 AM
send original file so we can compare it with our files, in this ECu there are many variations.

davsmith64
2nd April, 2013, 12:52 PM
i have a good working flash file that DOES run on this ecu.. I know if i can get this file back on the ECU and it will run without fault.. I just need someone that can actually put me the file on via bdm as fgtech wont communicate with it via OBD..

davsmith64
2nd April, 2013, 12:56 PM
this is the good 100% working file

tehnosoftex
2nd April, 2013, 01:00 PM
Then why did not try to write via fgtech bdm?

bondiblu
2nd April, 2013, 01:32 PM
How quick do you need it doing? Unfortunately I'm away for a few days.

gad3n
2nd April, 2013, 04:21 PM
recovery should work fine with MPPS on this ecu

davsmith64
2nd April, 2013, 11:22 PM
i only have mpps v6 and not v12 :/

ominimicu
3rd April, 2013, 12:16 AM
i had a bad write witn mpps, bu finally recovered it with the same mpps. but it was v12. try it with your version, try all 3 different speed settings

davsmith64
3rd April, 2013, 11:46 PM
I have FGTech 2, MPPS V12 on its way. Had the car & ecu at ukchiptuning today. Tried to read with various tool i.e, CMD, Kess V2, Genius. Even had the ecu on KTAG, managed to read it however it will not let him write any other flash file to it unless its and actual BDM rear file. Tried converting my good flash file to BDM and still wont write to it even by BDM,. So now I need to get a full BDM read from somewhere,
Thanks
Dave

Plowman
4th April, 2013, 04:25 PM
Please post BDM read

Remapking
11th April, 2013, 03:38 AM
Did you manage you get it sorted? if not drop us a message

Regards