help toyota corolla 2010 p0340 camshaft positon sensor circuit

[elmaalouf]

hello friends pls i need help i got a car corolla 2010 flood damage i changed the ecu and the immobiliser and the keys of the car and the fuse box from another working car
the car start and cut after 3secinds and some times after 5 seconds
i did diagnostic and it show me p0340 camshaft position sensor circuit
any help about how to solve my problem?
thanks in advance

[teuton]

Hi, in first place you should circuit integrity, means power supply, ground and signal wire, furthermor continuity, no sshort to ground or power etc. You got the diagram?

[elmaalouf]

No nt have it can I get it?

[teuton]

you'll need to tell which engine/engine management in order to give you the correct diagram. (1.8l or 2.4l or...)

This is the generic diag flow chart for P0340:

DTC Code P0340

DTC Code:
P0340


Description: Camshaft Position Sensor A Circuit (Bank 1 Or Single Sensor)


Probable Causes:


Sensor or solenoid faulty
Connector terminal contact is damaged or corroded
Wire harness - Check harness for correct voltage, open, short to ground or short to voltage
Update control unit software - Check for the latest control unit update
Powertrain or Engine Control Module faulty






BR

[elmaalouf]

hello friend thanks its 1.8 engine