Renault Twingo

[BrunoPT]

hello guys,
Here I have a renault twingo year 98. The same problem has immoblizador, the light will not stop blinking.
Immoblizador removed with the SWAP system and the cutting pin 37, since this has 55pin ECU.
The car insists not work, and so I turn on the lights in the same quadrant flashes forever.


Any idea?
Annex photograph ecu.
190301

[ninja123]

what is the SWAP system????

I do this ecu with renault immo tool, works good.

ninja

[BrunoPT]

I used the immo decoder 3.2.
Can you send me the file immo off??? Thanks

[kire106ka]

hello guys,
Here I have a renault twingo year 98. The same problem has immoblizador, the light will not stop blinking.
Immoblizador removed with the SWAP system and the cutting pin 37, since this has 55pin ECU.
The car insists not work, and so I turn on the lights in the same quadrant flashes forever.


Any idea?
Annex photograph ecu.
190301
Try these works

[BrunoPT]

i il try and report.

Thanks

[BrunoPT]

hello guys,


The car already worked once, but then never got.
The light immoblizador insists be linked, and now with the method that works 100% say they no longer puts in the work.
When I turn the key in the first position, the engine light flashes along with the immoblizador, put the pin 22 to mass delete it, I hope the 10-second shot, he pulls back but the gasoline engine light appears again blink.


Any idea what it might be?

[kire106ka]

Did you cut wire 37 fom ecu plug before do the procedure

[BrunoPT]

Yes cut ...

[kire106ka]

1.pin 37 - cut from ecu
2.conect ecu to car
3.ignition on
4.in 27c512 memory pin 22 circuit a few to tens times to ground
5.immo removed
Must twice check pin 22 if you got a wrong pin chim may be destroyed.
If you do these procedure right immo must be off dont look immo light try to start the car

[BrunoPT]

Solved.

Thanks guys

[kire106ka]

Where was the mistake i'am just curious

[BrunoPT]

the error was that the part which controls the central locking of the car, and the receiver of the command key, the injection cut the car, ie assumed that it was locked on and immo. removed the piece, did the process again and got 5 * immo light completely extinguished.


Bruno

[fathi abbasi]

Please send password

[DOUGLASDL]

could send me the password thanks

[Meat-Head]

Great another thread going to be ruined by a million requests for password

share or remove!

[kire106ka]

Here you are

[haingoben]

hi, could send me the password,thanks you friend.

[fathi abbasi]

Here you are
Possible send the password

[BrunoPT]

hi, could send me the password,thanks you friend.


Possible send the password


File above without password

[kire106ka]

File above without password
File is without pass