Toyota Corolla 2008 to 2013

[Ashar]

HI every one Pleas tell me about Toyota Corolla 2008 to 2013 i done its mileage to open its needle i want mileage correction with its back point what kinds of thing i attached it back point and take mileage correction .
Thanks

[afitijuana]

goes by behind, remove cover 56rl or 93C86 for late models.

[Ashar]

That's i know i want to its pin point 12345 & 8

[afitijuana]

if you really open it you will se the eeprom for sure.

[Ashar]

sorry Atif i think you do not understand my question . i have pony prog i want pin point of 93c56 in back side of speedometer Toyota corolla

[Ashar]

Like That ,,,,,,

[r_parev]

http://www.apel.ru/ftpgetfile.php?id=94 Thanks to colleague rust55

[Ashar]

Any Body can Help me for that problem.

[afitijuana]

what is you problem, I don't see any ?

[Ashar]

My problem is that i am using Pony Programmer and done approx all Toyota Model with Pomona Soic-clip Model 5250 but when i correction of mileage of Toyota corolla then me complete open the mother board because mileage correction cluster 93c56 is in side of board i want its pin points 12345 & 8 out side of the board

[claudio35]

My problem is that i am using Pony Programmer and done approx all Toyota Model with Pomona Soic-clip Model 5250 but when i correction of mileage of Toyota corolla then me complete open the mother board because mileage correction cluster 93c56 is in side of board i want its pin points 12345 & 8 out side of the board
Hi,
Post image,

[afitijuana]

My problem is that i am using Pony Programmer and done approx all Toyota Model with Pomona Soic-clip Model 5250 but when i correction of mileage of Toyota corolla then me complete open the mother board because mileage correction cluster 93c56 is in side of board i want its pin points 12345 & 8 out side of the board

Mi friend is about time to jump over to next level, don't stay in beginer go advance you have 3 option as follow.

1.-Use a DVHM or a multimeter use the fucntion for continuty or beep function, put one lead of the multimeter on the side of the chip you would like to find.

like the leg 1 of the eprom follow till you find a bdm point for small circles, usually mark as Tp3, TP1 etc.. (Tp) mean test point and the number follow is not necesary related to the leg of the eprom you are tracing.

2.-Remove the EPROM from cluster and have a Clean and thrusted read of the EEprom, some times reading in circuit give you wrong lectures o corrupted dump so this woudl be you primari option ever.

3.- pay some else to do the job and or quit what you doing.

If you plan to be in this bussines for long time get more and better tools, don't be afraid about damage something in order to learn you must.
ask any other member this fourum and they will share they past experience, about how they learn

Browse youtube for video related to SMD Removal.

REGARDS

[scip2]

Ashar want to cut huge tree using his swis knife.

[automan123]

Hi ashar.........hope you can find out yours pinout here http://www.digital-kaos.co.uk/forums/f174/asian-cars-dash-pinouts-164033/?highlight=toyota

Ps:
Some cluster don't have the pinout.....you just need to clip or read it off board

[Ashar]

Thanks all mate i know that corolla speed meter mileage not reverse in back side but i see there form have many experts in that field i think they know any new idea for that problem But thanks