View Full Version : problem w204 display (-------) on mileage
khalilo_de
10th April, 2013, 01:28 AM
hi DK's i have a problem with a w204 the problem was ESL
i changed full kit for the car ezs + ecu +esl
the car start fine and there is problem with dash it show ------ on KM
so i changed the vin on other unit (abs+SRS) so no problem there
i had modified dash to 0KM and to the same value for ezs but the problem exist in dash not show mee KM
pleas can some one help mee with best solution
yugo45
10th April, 2013, 05:10 AM
SSID in not same in the Dash and EZS.
You need to sync Dash with EZS, if you put 0 km in dash MB Star can do the job, or you know SSID from new EZS , post it here along with Dash dump here and I will add SSID to it.
cartronic
10th April, 2013, 11:02 AM
DP3 can adapt used dash vith OBD
br
cartronic
khalilo_de
10th April, 2013, 11:05 AM
SSID in not same in the Dash and EZS.
You need to sync Dash with EZS, if you put 0 km in dash MB Star can do the job, or you know SSID from new EZS , post it here along with Dash dump here and I will add SSID to it.
the adaptation must be online with star ? i must have id and pass
ALEXEI
10th April, 2013, 11:08 AM
you can also flash the dash without syncro with ezs
khalilo_de
10th April, 2013, 11:20 AM
you can also flash the dash without syncro with ezs
tell me how can i do that pleaz
wiseman
10th April, 2013, 11:33 AM
tell me how can i do that pleaz
Try the cluster plug into the back of the clocks and program miles using DP3 or similar, may break sync and display miles properly after this.
Or do mileage Obd with similar tool
batandball
10th April, 2013, 12:16 PM
Plug cluster plug into the back of the clocks and program miles using DP3 or similar, will break sync and display miles properly after this.
You can do this also via the eep in the dash, 2 bytes stop the sync in the dump
did not know you could do that with the 204 with dash plug
203 yes ?
wiseman
10th April, 2013, 12:26 PM
Well I've tried it with the w164 and worked, also w219.
Just try doing the mileage obd and it will break sync
khalilo_de
10th April, 2013, 01:53 PM
HERE IS THE ORIGINAL DASH DUMP WITH (------) on display
yugo45
10th April, 2013, 03:20 PM
the adaptation must be online with star ? i must have id and pass
No , do not need.
How did you make EZS 0 km?
If you have Eeprom for old and new EZS , please post here.
khalilo_de
10th April, 2013, 05:26 PM
No , do not need.
How did you make EZS 0 km?
If you have Eeprom for old and new EZS , please post here.
EZS FOR W204 CAN4T BE READ THE EZS HAS 41730km
OKEY
fear_dark
10th April, 2013, 05:32 PM
which use tools?
fear_dark
10th April, 2013, 05:34 PM
u need change km via obd
yugo45
11th April, 2013, 06:27 AM
EZS FOR W204 CAN4T BE READ THE EZS HAS 41730km
OKEY
If you have MB star can you try to read SSID in EZS?
khalilo_de
11th April, 2013, 11:26 AM
y (http://www.digital-kaos.co.uk/forums/newreply.php?p=1936919&noquote=1)es i have MB star how can i get ssid pleas
yugo45
11th April, 2013, 04:18 PM
If u go you EZS there should be somewhere SSID , go in every menu, it will be 4 byte (Example A0 F7 55 D3).
or put 0 Km in dash and adopt it with MB Star. You do not need online connection.
benzstop
12th April, 2013, 01:02 AM
use avdi and adapt use procedure to adapt used dash and all will be well
diagnoza_auto2000
12th April, 2013, 07:24 PM
SSID can be read from key too... by IR
And when you try to adapt put 0 km and job done!
Auto Clinic
25th June, 2013, 05:51 PM
hi DK's i have a problem with a w204 the problem was ESL
i changed full kit for the car ezs + ecu +esl
the car start fine and there is problem with dash it show ------ on KM
so i changed the vin on other unit (abs+SRS) so no problem there
i had modified dash to 0KM and to the same value for ezs but the problem exist in dash not show mee KM
pleas can some one help mee with best solution
my friend
how you changed vin on (abs+SRS) ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.