Audi A3 Dump corrupt

[leprosylv]

Hi, I have an Audi A3 8L 2002 with Magneti marelli Dash Board.

With a bad maneuver with a program I did crash my Dashboard. Now it shows 999999 km
http://imageshack.us/scaled/landing/41/img0085odk.jpg
I read MCU with UPA USB

Dump url : http://leprosylv.free.fr/privee/audi/Dump.rar

Original mileage : 143 xxx
Mcu : 68HC912DG128

Thank you very much

[blazej1200]

try this file

[leprosylv]

Thanks a lot ! I try this week end !

Have you an idea about my problem?

[leprosylv]

Always 999 999 km your dump

[thunderwinged]

Always 999 999 km your dump


try this dump and see no have capacitor/resistor lost

if is ok i can input any km to you, i think your dump is good this dash have checksun in KM

[yugo45]

Hi, I have an Audi A3 8L 2002 with Magneti marelli Dash Board.

With a bad maneuver with a program I did crash my Dashboard. Now it shows 999999 km

I read MCU with UPA USB

Dump url : http://leprosylv.free.fr/privee/audi/Dump.rar

Original mileage : 143 xxx
Mcu : 68HC912DG128

Thank you very much
DO you remember exacy how many Km was, not like 143xxx?

This dash has checksum and that is why you get 999999, checksum was not calculate.

[leprosylv]

No, I don't remember the exactly mileage.

How to re-calculate mileage

[leprosylv]

try this dump and see no have capacitor/resistor lost

if is ok i can input any km to you, i think your dump is good this dash have checksun in KM

I try this dump, always 999999

[thunderwinged]

i think your problem no is dump, please look if memory is correct position and pins correct

[yugo45]

i think your problem no is dump, please look if memory is correct position and pins correct

Yes it is , he change km with out correcting checksum.
The problem is he does not remember old km, if he does it will not be a problem at all.

[leprosylv]

It's possible to correcting checksum ?

[ligonis]

I had the same problem, solved it with digiprog3 (it has 999999 repair function) and no matter what was the mileage.

[leprosylv]

Neither software can calculate checksum ?

[koyot]

need you to buy dp3 ori ori our abritus
You have bought the Chinese garbage and want me to doing miles km and and

[Zeittt]

Hi

Try this file and post result

[leprosylv]

Hi

Try this file and post result

Hi, I try and always 999 999 ! F**** car !

[leprosylv]

Digiprog can work with the BIN file ?

[leprosylv]

Another idee ? Dump ?

If i change my dashboard, can i fix my problems ?

[ligonis]

does not need any bin file with digiprog, connect the cable, pressing the repair function 999999 and done. Or you could replace the dash, but then you will need to adapt the key

[leprosylv]

it's difficult to adapt the key ?

I can't turn a blank dump ?

[davecooper47]

Digiprog 3 Garbage will fix this!!!!!!!!! For the ?160 I paid for it, it most certainly isn't garbage. I'm getting a bit p***** off with people thinking they're above anyone who uses one of these. Especially as most of you have used a cloned Diga at some stage. What's the difference??? I have equipment that has cost me many thousands of pounds but I also have 2 of these and they do a fanatastic job for what I paid. Go to Audi A3 999,999 repair menu and program mileage with that. It will ask if checksum is some value. Try the first one. If it still shows 999,999 after first program do the same thing again but when it shows you the first checksum value choose X and it will show you a second checksum value, choose that one instead and that should solve it. This is the second thread on this same subject. There are 2 different checksums for this dash. DO THE 999,999 REPAIR OPTION. IF THE FIRST CHECKSUM DOESN'T WORK THEN TRY THE SECOND. It's as simple as that.

[leprosylv]

Sorry for my poor english but I think I understand the idea of your message.

I search on ebay, and I have'nt found a Digiprog 3 for less than $ 500

[davecooper47]

Not on ebay. Google it. Plenty of chinese sellers around $300.

[leprosylv]

I found this :

Best Price Main Unit of Digiprog III Digiprog 3 Odometer Programmer with OBD2 ST01 ST04 Cable (http://www.obdii.fr/best-price-main-unit-of-digiprog-iii-digiprog-3-odometer-programmer-with-obd2-st01-st04-cable-2617.html)

For 200***8364; with shipping ( 260$ ) for Digiprog 3 + ODB2 cable

It's ok for fix my problems ?
If i buy digiprog, can I diagnostic and correction new car ? ( < 2011 )

I hesitate between buying this unit and replace the dash

[diagtech]

Buy dp3 no brainer

[Lidahus]

You may check this post (http://www.digital-kaos.co.uk/forums/f174/please-explain-me-247942/#post1401582) for mileage CRC calculations.

[leprosylv]

I just buy Digiprog 3.

In the menu they have ( 999 999 repair ) Use connector 41/2

201579 But they have 2 solo connector ... where I connect it

[autocargo]

Check this out... Use google translate...

[leprosylv]

Always 999 999 km after digiprog ( repair 999 999km fct )


http://www.youtube.com/watch?v=01ozXpKNA5k

201860

[autocargo]

I'll quote here member ''davecooper47'' (http://www.digital-kaos.co.uk/forums/members/224768-davecooper47/)
''DO THE 999,999 REPAIR OPTION. IF THE FIRST CHECKSUM DOESN'T WORK THEN TRY THE SECOND. It's as simple as that.''
I haven't seen you doing second checksum...

[leprosylv]

Sorry, but I don"t understand, my english is too bad.

You told me to use twice the Repair option 999 999 with same Km ? right ?!

[autocargo]

There are 2 different checksums for this dash. Do exactly same as you did before right to the point you enter km. After you input exact same km as before, when prompted to correct checksum you choose not to, and you will be given another checksum again (second checksum) you select OK and do that one... Try it out and let us know the outcome.

[leprosylv]

Ok, perfect i try this week !

Thanks a lot ;)

[leprosylv]

It's perfect ! Your solution works !

Thanks a lot all !

[leprosylv]

Sorry to re-up the topic, but I always have a problems !

When I start my car, the screen show "Service !", The problems can make cause because I don't reset the alarm for maintenance !

But I still even a bigger problem, the computer still tells me fuel consumption in real time 0l/100 or 43l/100

Thanks a lot

[leprosylv]

I can post the dump of 8L0 920 932 M

[CARPARTS]

You can also drive to Avignon, there lives your friend.

[leprosylv]

Why avignon ?!

[dorofteius]

Can anibody help with repairing the same thing on audi mm-jaeger dashboard with hc912.

The original km was 330 k, it was set the to 220k, and it ended to 999 999 with digiprog.
Here is the dump atached.
Thank You.

[yugo45]

You need to know first 4 digits of original km, do you remember that ?

[ionut red50]

334322

Trimis de pe al meu SM-G925F folosind Tapatalk

[ionut red50]

It have 334232

Trimis de pe al meu SM-G925F folosind Tapatalk

[ionut red50]

Ok thanks i

Trimis de pe al meu SM-G925F folosind Tapatalk

[dorofteius]

Thank's Yugo45. It was the car of
ionut red50 (http://www.digital-kaos.co.uk/forums/member.php/458071-ionut-red50)
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/statusicon_blue/user-offline.png
And it was solved with digiprog in circuit.