PDA

View Full Version : Magneti Marelli IAW 6LP2.05



lucim12
10th April, 2013, 11:15 PM
Hello
What tool do i need to read this ecu ?
I tryed galletto 1260 in boot mode and mpps v12 and not working..

lucim12
20th April, 2013, 03:36 PM
any ideas ?

mishu_b
21st April, 2013, 12:50 PM
BDM

Galletto 2

sumi1
2nd May, 2013, 09:12 PM
magpro 4.2 obd

diag1001
2nd May, 2013, 09:34 PM
galleto good luck

easytech
2nd May, 2013, 10:29 PM
Every tool with ST10 bootmode option can do this.

lucim12
5th May, 2013, 10:56 PM
Thanks a lot!

metsat
2nd August, 2013, 12:37 AM
hi,
car is citroen c4 2006 my 1.4 kfu engine, ecu is magneti marelli IAW.6LP2.05. ecu broken. I read that st10f280 with st flasher but I dont write another 2.nd hand ecu, and old org ecu erased. I have only 1.44 hex file. need 512kb virgin file. I converting hex to bin my file size is error 576. do you convert hex to binary my org file 512kb.
b.r

racin-snake
2nd August, 2013, 12:50 AM
XPROG M will do the job

metsat
2nd August, 2013, 04:26 AM
XPROG M will do the job

original file erased.

Zmann
2nd August, 2013, 05:17 AM
use winols to convert the hex file

racin-snake
2nd August, 2013, 01:02 PM
whats software and hw nos il look to see if i have a file for the mpc555 and virginise it for telecoding ?

bobolin4o
2nd August, 2013, 02:23 PM
hi,
car is citroen c4 2006 my 1.4 kfu engine, ecu is magneti marelli IAW.6LP2.05. ecu broken. I read that st10f280 with st flasher but I dont write another 2.nd hand ecu, and old org ecu erased. I have only 1.44 hex file. need 512kb virgin file. I converting hex to bin my file size is error 576. do you convert hex to binary my org file 512kb.
b.r

I think this is your file.

racin-snake
2nd August, 2013, 02:36 PM
try this and report

sumi1
23rd February, 2014, 08:05 AM
Ciao ho Bisogno di ONU di file o di Leggere in Modalit? di Avvio con Galletto V53 da 576 kb please.ECU E Stato Bloccato DOPO Che ho Scritto MagPro Spirito obd.Read con Galletto v 53 in bootmode 576KB
tab io originale + Modalit? di Avvio Galletto V53 scheda

lucim12
22nd March, 2014, 11:18 AM
Hy
had similar problem with marelli, ecu crashed in writing with galletto

I restored ecu with lexia 3 , download ecu section,
recode injector section and walla!

br

i_shot_the_sheriff
25th May, 2018, 08:42 AM
Hello mates

Does anyone have the pinout for 6LP2.05 for x-prog ?????

Thanks :)

lion0304
1st September, 2018, 08:46 AM
Hello mates

Does anyone have the pinout for 6LP2.05 for x-prog ?????

Thanks :)

Here i just made by myself. You can make connection by 2 sides of ECU.