What regulator do you guys recommend/use?

[motorsportsz]

Hi there
What regulators would you guy recommend to keep the power stable above 13volts whilst benching/boot mode unlocking a ecu

[pablo1971]

i use a midtronics trickle charger....max voltage is13.50v----but works a treat.never let me down,even on the bmw were 14v is "supposedly" needed..

[motorsportsz]

Cheers buddy
Is this any good? On the other forums it is highly rated

http://www.amazon.com/gp/aw/d/B0002JTD2K

I'm not too fussed about the price. Just need a stable power supply

[pablo1971]

i would say that is ok for what your wanting it for.

[motorsportsz]

Thank you mate. Would it be stable for bdm?

[pablo1971]

yes mate.it will do the job for bdm no problem.........also just make sure you each out the ecu etc

[camil]

For bench flashing i use a Yuasa NP12-12 battery :)

[motorsportsz]

Cheers lads

[spawns3]

For bench flashing i use a Yuasa NP12-12 battery :)

I use a desktop power supply :D

[plagu]

I use a desktop power supply :D

So do i :D
192136

OLD AT-power, does not require anything useless like atx powers, just modded power switch directly to power, and added indicator led :D

[wiseman]

192227I use this Watson bench supply

[veloseeped]

Mastech HY1803D
Compact size. Fully linear power supply.
192236