View Full Version : What regulator do you guys recommend/use?
motorsportsz
11th April, 2013, 09:52 PM
Hi there
What regulators would you guy recommend to keep the power stable above 13volts whilst benching/boot mode unlocking a ecu
pablo1971
11th April, 2013, 10:01 PM
i use a midtronics trickle charger....max voltage is13.50v----but works a treat.never let me down,even on the bmw were 14v is "supposedly" needed..
motorsportsz
11th April, 2013, 10:26 PM
Cheers buddy
Is this any good? On the other forums it is highly rated
http://www.amazon.com/gp/aw/d/B0002JTD2K
I'm not too fussed about the price. Just need a stable power supply
pablo1971
11th April, 2013, 10:34 PM
i would say that is ok for what your wanting it for.
motorsportsz
11th April, 2013, 10:37 PM
Thank you mate. Would it be stable for bdm?
pablo1971
11th April, 2013, 10:50 PM
yes mate.it will do the job for bdm no problem.........also just make sure you each out the ecu etc
camil
11th April, 2013, 11:44 PM
For bench flashing i use a Yuasa NP12-12 battery :)
motorsportsz
12th April, 2013, 01:34 AM
Cheers lads
spawns3
12th April, 2013, 02:01 AM
For bench flashing i use a Yuasa NP12-12 battery :)
I use a desktop power supply :D
plagu
12th April, 2013, 06:31 AM
I use a desktop power supply :D
So do i :D
192136
OLD AT-power, does not require anything useless like atx powers, just modded power switch directly to power, and added indicator led :D
wiseman
12th April, 2013, 02:29 PM
192227I use this Watson bench supply
veloseeped
12th April, 2013, 02:48 PM
Mastech HY1803D
Compact size. Fully linear power supply.
192236
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.