VW MS9S12HZCAL256 CAL

[guillermoc]

Hello, this connection could help thanks.

[pezao]

192131


Work 100%

[guillermoc]

Thanks, these two models are similar and one of them was missing, thank you very much Pezao.

[guillermoc]

No mileage reading, I use "Programmer 9S12X 1.54" Same should I change the crystal?:giveup:

[thunderwinged]

with upa no need change cristal

[yugo45]

Hello, this connection could help thanks.
What VW car is this and what year,Polo , Fox ?

[guillermoc]

192133
GOL 2011/12, Using "Programmer 9S12X 1.54" set up reading, but does not work as a fox

[thunderwinged]

friend that work 100% if no read please change your programmer to read USE UPA-USB

[yugo45]

GOL 2011/12, Using "Programmer 9S12X 1.54" set up reading, but does not work as a fox

Can you read full eeprom?
If you do post here with original miles.

[marcio1758]

Can you read full eeprom?
If you do post here with original miles.


here is the dump! and wanted you to know that your work helps to disseminate this girl is very noble of you! already made my donation! hope others can do the DK too!

[guillermoc]

Unfortunately my friends "9S12X Programmer V 1.54" does not read this dashboard, but if you read the same but with a different micro pin Connection location (near the micro, not down like this), not to have happened, you can tell me?
The data of "VW_BRASIL_Gol-G5_Saveiro-G5_Voyage-G5_2011_MagMar_MCU_MC9S12HZ256CAL_3L16Y_v2" is not equal to that of the "GOL" but has the same micro?

[yugo45]

here is the dump! and wanted you to know that your work helps to disseminate this girl is very noble of you! already made my donation! hope others can do the DK too!

I attach file with 0 km. I always do this way and adopt new Km with VCDS.
If you have VCDS you can add how much you want :


[Select]
[17 - Instruments]

[Login - 11]
Enter a value of 13861
[Do It!]

[Adaptation - 10]
Enter "channel number" 09 to select channel
Put in NEW Value the number of km divided by 10. Example: If old cluster had 50,357 km, put in 5036.
[Test]
Observe the Instrument Cluster and make sure the km displayed is correct.
[Save]



If you do not have tell me how much Km you want?

Thank you on very kind worlds for this little girl. Thank GOD donation help a lot and money for deposit for surgery is there.
She is already in Houston and in few days we will see what will happen.
I hope and pray she will go OK through surgery and she will be healthy and alive.

Thanks.

[thunderwinged]

all dash you can input km direct ,no need make adaptacion with vag or vcds . bah

you can use licznik 4.8 (fox) is same

[yugo45]

you can use licznik 4.8 (fox) is same
It is not working on this dash. Km/Miles are located is different location.

[guillermoc]

Data read with "9S12 Gold Box v 1.54" Km original aprox 120.000, not remember now!

[yugo45]

Data read with "9S12 Gold Box v 1.54" Km original aprox 120.000, not remember now!

It has 122500 Km.
What do you need,
0 km or other value?

[thunderwinged]

Friend what your problem? i change km gol with 9s12hz256 all day and no have problem with calculator km , what you need?

[guillermoc]

Hello, like in the other thread I say that we can modify some "HZ256 CAL" and some not, some of us have trouble finding mileage, then ... this must have different positions, could indicate where they are in each case and how to calculate it, (In Tachosoft 23.1 does not find the solution) thank you very much for the help!