VCSD----Repair your vcds step by step

[kire106ka]

Post too old deleted

[sagajulian]

thanks for de help

[kire106ka]

I need to know if these procedure works for some of you a friend confirmed that works on 11... he manage to repair after interface blocket from rostech update

[mishu_b]

...
I can't see Atmega162 dumps.
Could you please tell us - how we will reprogram the uC? and with what?

[kire106ka]

deleted too old procedure

[slobodynuk]

***1089;***1087;***1072;***1089;***1080;***1073;** *1086; ***1086;***1095;***1077;***1085;***1100; ***1087;***1088;***1080;***1075;***1086;***1076;** *1080;***1083;***1086;***1089;***1100;: ***1042;*

[pacoraban]

Hi there,

I would like to try to repare my cable too. I need to download the files and so I first need to post here... ;)

[almia]

Yes i know that just read the manual i didn't invent these just upload here.
I follow the manual and stuck on step 13 the program shuts down on my interface.
I posted here so everyone can try and share experience if these procedure don't work ok byt if it works will be great.
A friend from who got these repair his vcds 11.09

Repair process

Step1: Please ensure that you have installed the VCDS software.

Step2: Plug your disabled cable to the USB. There maybe be a pop-up window to indicate you to install the driver, for damaged cable, let it be, skip it.

Step3: Right click "my computer", select " hardware", then "device manager", then "Other device", the " USB device".

Step4: Right click "USB device", select "properties", select " detail", there will be a line information displayed. VID_xxxx & PID_xxxx, please write down the 4 letters or number for VID and PID.

Step5: Unplug the cable, select" my computer" --"C:/"--"Ross-Tech"--"VCDS"--"RT-USB.inf".

Step6: In item [FtdiHw], please add one more line as " %USB\VID_xxxx&PID_xxxx.DeviceDesc%=FTD2XX, USB\VID_xxxx&PID_xxxx", please ensure the four number or alphabets are the same as the ones you write down in step 4.

Step7: In the end of the text, add one more line as " USB\VID_xxxx&PID_xxxx.DeviceDesc="VAG-COM Compatible USB Interface", the four numbers or alphabets are also the same as the ones you write down in step4.

Step8: Save "RT-USB.inf" file and then exit.

Step9: Unplug the cable, and then plug the cable to the USB port. System will indication found new hardware, and will pop up window for driver update. If do not have the pop up window, let it be, Right click "my computer", select " hardware", then "device manager", then "Other device", then right click "USB device", select update drive.

Step10: Let the driver point to C:/Ross-Tech/VCDS

Step11: System will search the drive for several seconds, then it will indicate that find the driver and then install it.

Step12: Open the software "vidpidfix.exe" i sent you. Click "search", there will be indication two lines of information. First " found one device", second "0".

Step13: Click "0", then click "open", the information will be displayed in he blank dialogue. Click "write default EE data", if success, there will be a pop up information " wirte successful". Then click "ok" and exit.

Step14: Unplug cable and then plug cable.

Step15: Just as the step 10, update the drive and let the file point to the file "VCR_CDM 2.00.00" that i send you. There will be a indictaion information that it install completrly.

step16: Open the file" MProg3.0_Setup.exe". Click" device" and then"scan", if above steps are all well done, there will be information " find one device".

Step17: Use Mprog2.8.exe to open file " genius vag com ept.ept" that i sent you. Then click "erase", if succeed, there will be a information " successful", and then click " program" , if succeed, there will be a informtion " programmed serial under disabled"

Step18: Your computer can recognize the cable now and your cable is ready to use.


Hello people,
I have a vcds of 12.12.3 and my problem is not ready can.
here can help me above mentioned solution?
If not, does anyone know a solution to a problem can not ready?

[paro44]

Hello people,
I have a vcds of 12.12.3 and my problem is not ready can.
here can help me above mentioned solution?
If not, does anyone know a solution to a problem can not ready?

Is your car can-ready?

[almia]

hello paro44

yes, I have an audi a4 b8 type
and my vcds is working about half a year on my car now he does not want
I also put back the date of my laptop, I get a message that date is not korrect.

to correct date:
port status: ok
USB library version: 03.010.19
usb driver version: 2:06:01
interface found
Type: ross-tech hex USB + can
version: 192
footer copyright (c) 2011 by hex microsystems pty & ross-tech, llc.
Status: ready
k1: ok
k2: ok
can: not ready

This message I get
any ideas to solve?

[hk06]

it mean the cable is not connected to the car

[almia]

This message I get when the cable is connected to the car
and if I do not connect I get a message
k1: short to ground
k2: short to ground
can: not ready

[denarg]

New on this forum, need the file to try to repair my VCDS 10.6. Hope it works ;)

[denarg]

Kire106A , I just want to thank you.
You're ept works on my

CHINESE

cable.
I've juste adapt it to my VAGCOM :
Erase the cable with
FTD2XXST.EXE (http://www.ftdichip.com/Support/Utilities.htm)
Launch MPROG3.5 (Same link)
Change ftdi chip, my chip is FT232RL, I've chosen FT232R on MPROG Interface instead of FT232BM

I reload RTUSB driver from VCDS, test the cable with VCDS, it works
I've connected on my CAR (AUDI TT MK1 V6), Test the cable, but CAN is not ready, I've FORCED K connection it works for Engine
I have change my Option to add my new cruise control, it works

Now I have to resolve the CAN problem

Also, does somebody have an English Version in 10.6.4 (Chinese Product), I have the tool in french ?

[Mario6]

VCDS 10.6.4 EN.

If "CAN" is not working. Try another laptop.

https://zachowajto.pl/!GXPpP4taw9PE/vcds-release-10-6-4-installer-exe

(https://zachowajto.pl/!GXPpP4taw9PE/vcds-release-10-6-4-installer-exe)Slow download (https://ulozto.net/%21GXPpP4taw9PE/vcds-release-10-6-4-installer-exe#download)

(https://zachowajto.pl/!GXPpP4taw9PE/vcds-release-10-6-4-installer-exe)

[ilpopi]

Hi there,

I would like to try to repare my cable too. I need to download the files and so I first need to post here... ;)


Me too.....

[Mario6]

Hi. It's not about repair just updating. Someone may try this. I tried with clo.VCDS 12.12.0 but I have no atmega 162 and failed.( message Not boot mode)

http://obd2-diag.blogspot.com/2017/08/vcds-178-download-free-with-user-manual.html

[CM7YRE]

thank you!

[dikmo]

thx for the help

[frogear]

Thanks as well for your help

[Mario6]

Here is more on this topic.

http://www.digital-kaos.co.uk/forums/showthread.php/99750-VAG-COM-VCDS-EVERYTHING/page364?highlight=vag+vcds

[dokso]

i need repair 17.8. hex can cable.looks like that the vcsd soft connected to the internet and dissabled the cable :(

[Mario6]

i need repair 17.8. hex can cable.looks like that the vcsd soft connected to the internet and dissabled the cable :(

Hi.
First, check if you have an ATMEGA 162 chip inside. If you have it, you can program the cable again. Post above you have a link to the topic.
In post no. 17 you have a topic how to do it.

[Lexc84]

Hi.
First, check if you have an ATMEGA 162 chip inside. If you have it, you can program the cable again. Post above you have a link to the topic.
In post no. 17 you have a topic how to do it.

Dear Mario,

Please can you assist please ?
I have also a cable which is no more recognise by computers...
Try tro use vag revival without success.
I have an atmega 162 chip, and i have not find how to program the cable.
Please can you provide me the link or the process to follow ?

Thanks a lot for your help

Regards
Lexc84

[Mario6]

Lexc84 (http://www.digital-kaos.co.uk/forums/member.php/611340-Lexc84)



Hi. Read this topic. There is everything you need. From post no. 7206, download Kolimers loader V 7.1. There is a PDF file with instructions and photos on how to update, repair the cables.

Post 7206
http://www.digital-kaos.co.uk/forums/showthread.php/99750-VAG-COM-VCDS-EVERYTHING/page481

and here

http://www.eobdtool.com/blog/2017/08/how-to-repair-vcds-interface-for-any-language/

Post 7297

http://www.digital-kaos.co.uk/forums/showthread.php/99750-VAG-COM-VCDS-EVERYTHING/page487?highlight=vcds+vag

[Lexc84]

Thanks a lot for your help Mario !!

[ASCM]

Hi does anyone can help me i tried to update my vcds cable after that vcds its locked does anyone can help me with steps how to repair?

Sent from my SM-A125F using Tapatalk