citroen c4 help please

[autokey pro]

Hi mates,
please i need help to get pin code from bsi dump for citroen c4 2005.BSI is valeo with eeprom 95128.
Thanks in advance,
Regards.

[topclef]

AYL1 or 1LYA

[autokey pro]

Hi mate,
thanks for reply,the pin code is 100% correct but when i try to program key i always get (key programming failed).would it help to virginize the bsi and try to program keys again?if yes,please i would need a virgin dump for this bsi.
Thanks for your help and support,
Regards.

[ninja123]

what keys are you trying to program, old key or new key? Are you just trying to add a key or is there other problems?

Dont virginise bsi if only trying to add key, what programmer are you using?

This car should be very straight forward once you have pincode.

ninja

[igorr]

use new tansponder

[autokey pro]

Thanks mate,what is the chip inside key?4D 60 ?
Thanks.

[autokey pro]

i diagnosed the car,the pincode is matched in both bsi and ecu but the keys programmed (0).
I am trying to program the old keys of the car so it accepts the pin code but does not want to program keys. I still get (programming keys failed).I would try with new transponders tomorrow.
chip inside keys is ID46
Regards.

[ninja123]

use blank pcf7936, but your remotes will not work.

What was problem with car to start with?

Have you changed any control units?

ninja

[keysph]

Did you check the battery voltage or the ignition coil wires fro communication?

[autokey pro]

Hi mates,
i have tried blank pcf7936 but did not work also.Please is there immo off solution for this car?ecu is ME7.4.5 with eeprom 95320.
Thanks in advance,
Regards.

[autokey pro]

here is ecu details

[autokey pro]

hi mates,
i am stuck here,please i would need either immo off for ecu or a virgin dump for bsi.Both original dumps are already posted here.
Thanks in advance.

[autokey pro]

here is also bsi info.
Thanks in advance.