PDA

View Full Version : DPF off Audi



badisan
16th April, 2013, 01:13 PM
Can somebody turn off DPF Audi A6 2.0tdi 0281012169 03G906016GC EDC16
I tryed with ecusafe but don,t work.

Best regards

Nio
16th April, 2013, 02:09 PM
Here is solution for this car.

rasequia
16th April, 2013, 02:11 PM
Pm me for password.

Nio
16th April, 2013, 03:51 PM
Can somebody turn off DPF Audi A6 2.0tdi 0281012169 03G906016GC EDC16
I tryed with ecusafe but don,t work.

Best regards

Yes m8. this is function work but must write on bdm mode and press reset dpf with diagnostic. BR.

zlukic
16th April, 2013, 04:17 PM
before dpf off, must reset dpf sensor..

badisan
16th April, 2013, 07:58 PM
I'll try tomorrow and I'll let the results.

Best regards

avtonega
5th June, 2013, 09:43 PM
Yes m8. this is function work but must write on bdm mode and press reset dpf with diagnostic. BR.


I will borrow this post

Is there any differnece bettween BDM or OBD proceed for DPF OFF
I have audi a4 116hp 1.9 tdi, I get white smoke behind all the time...
I have reset DPF difference sensor and reset DPF ash, with KTS

icezero2010
6th June, 2013, 12:59 PM
I will borrow this post

Is there any differnece bettween BDM or OBD proceed for DPF OFF
I have audi a4 116hp 1.9 tdi, I get white smoke behind all the time...
I have reset DPF difference sensor and reset DPF ash, with KTS

upload both file i think your file i wrong . white smoke is dpf regeneration

wiski
6th June, 2013, 01:13 PM
White smoke all the time may be also faulty injectors .

icezero2010
6th June, 2013, 01:19 PM
White smoke all the time may be also faulty injectors .

yes thats right . but i think the problem came with the kill from dpf

mika76
10th June, 2013, 09:32 AM
In my case, there is no white smoke but just dpf fault reappear on dashboard after removing DPF on file and physically
what is the solution to switch this fault

Diagnosticated
10th June, 2013, 10:33 AM
In my case, there is no white smoke but just dpf fault reappear on dashboard after removing DPF on file and physically
what is the solution to switch this fault

Post your file so we can see what changes you made.

carsinlet
10th November, 2014, 02:45 PM
Hi can someone please help remove the dpf from this ecu the dpf had been removed and car has manigment light on lack of power. i tryed with ecusafe and car will not start, put back to old progam and starts ok. is a audi a6 03g906016gc bosch edc 16u31 engine R4 2,0L edc16u31, with M58BW016DB. MPC564. i had to remove ecu from car and read with BDM i tryed fg galletto 2 and kess v2 unabel to read on car , thanks

twincam
11th November, 2014, 01:29 AM
This is DPF OFF ,cks is not corrected but BDM will do this in writing.PASS PM

carsinlet
11th November, 2014, 12:50 PM
thank you will try and post results.