PDA

View Full Version : volta works for dpf remove ??



ninja123
16th April, 2013, 08:47 PM
Will volta software work ok for remove dpf on a 2006 ford c max 1600 peugeot engine?

I try to regenerate with snap on and with ford IDS but not working.

thanks, ninja

assitutto
16th April, 2013, 09:00 PM
no, it's better use manual solution

ninja123
17th April, 2013, 07:13 AM
I would use a manual solution, but the guy who has done this for me in the past wont answer phone :(

I dont do many of this type of job so not too clued up about it.

ninja

taurius
17th April, 2013, 09:31 AM
Post original file :)

ninja123
17th April, 2013, 06:55 PM
here is file that I read with mpps, when reading flash, do i have to choose correct version?

I had 3 options of edc 16 3, or 36 or ??

I choose the first one and it read flash, here it is.......

ninja

Artilect
17th April, 2013, 07:26 PM
I have seen many EDC16C34 disabled by MPPS. I would not flash it with this tool if I was with you. Type in search Ford EDC16C34 and you wil se how many people need full BDM :D

taurius
17th April, 2013, 07:37 PM
Here is the file with the switch off ;)
Password sent to PM.

assitutto
17th April, 2013, 07:39 PM
right, mpps don't work good on that ecu,if you don't brick your ecu you lost injector coding

ninja123
17th April, 2013, 07:49 PM
so i need to check if it is edc16c34 first?

I read flash as edc16c3 I think, what ever the first option is to choose.

How do I know/check what ecu version it is?

MPPS did not tell this info.

thanks, ninja

perovuk
17th April, 2013, 07:53 PM
friend, I do not want to offend you, but check the label on ecu

taurius
17th April, 2013, 07:59 PM
It is a edc16c34, but the read was good.
C3 have 1mb flash, c34 have 2mb flash, yours is 2mb.

ninja123
17th April, 2013, 09:00 PM
do you know where the ecu is on this car, its a **** to get to.

ninja123
17th April, 2013, 09:02 PM
So, what tool can flash this ecu by obd? Any or only BDM?

Thanks, ninja

Nio
17th April, 2013, 09:06 PM
I always do this ecu on bdm and really good function only with switch off.

ninja123
17th April, 2013, 09:19 PM
ok, i dont have bdm, where is best to buy from, i hear lots of rubbish available :(

thanks, ninja

mexanico1971
17th April, 2013, 09:39 PM
buy a chip fgt2 !
work"s good on that ecu in BDM !
I use bdm adapter"s from china and it work in the recovery of one ecu, from C4 1.6hdi !
regards

ninja123
17th April, 2013, 10:11 PM
do you have a link for this tool from reliable supplier?

thanks, ninja

Artilect
17th April, 2013, 10:30 PM
The ECU its in the left side under the fender. Its just before front left wheel under the fender plastic.

FGT2 clone (with one LED) its working those ECU-s good over OBD and also over BDM.

You can try to write the file with MPPS, be shure to have baterry charger connected and write in slow speed. If you will have a problem its possible to recombine the flash if you have good MPPS Maps readout.

When you flash those ECU-s MPPS will tel you to turn off the dashboard and then after 10s turn back on. If you do so and start the car you loose Injector codes. When the writing its complete, turn dash off, wait 5min, turn dash on, wait 5 min and then start the engine ;)

If you would come so far of course :)

BR and good luck.

Nio
17th April, 2013, 10:35 PM
For me is always better use original tools. Really is much money (and updated cost a lot of money every year) but with clone if you make an error will spend more (my personal idea, maybe i'm wrong). There are a lot of people here on DK that use clones and seems be happy because function good, but i can't give you where to buy because i don't know if you need original or not original. Best regards.

mexanico1971
18th April, 2013, 04:41 PM
do you have a link for this tool from reliable supplier?

thanks, ninja


bring mine from here !

http://gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=690

if you don"t need bdm frame ask Jo if she sell only the adapter"s !

regards

perovuk
18th April, 2013, 08:08 PM
do you know where the ecu is on this car, its a **** to get to.
with the left front wheel, behind the plastic trim

Nio
20th April, 2013, 12:17 AM
I buy form gocardiag and not function on edc16c34 psa on writing. I don't know why. BR.

sepistar
20th April, 2013, 06:03 PM
I buy form gocardiag and not function on edc16c34 psa on writing. I don't know why. BR.

maybe you not choose the right ecu?
br.

ninja123
25th April, 2013, 09:47 PM
i ****ed this car, i write file with mpps ands noe car not starting :(

assitutto
25th April, 2013, 10:10 PM
right, mpps don't work good on that ecu,if you don't brick your ecu you lost injector coding

if you remember i told you

ninja123
26th April, 2013, 07:06 AM
I had to try, other members say ok to use :(

assitutto
26th April, 2013, 11:41 AM
now you need BDM backup to save your ecu

Artilect
26th April, 2013, 11:50 AM
You only need BDM.

If you have ori read by MPPS then you have ewrithink to restore this ECU.

First prepare the BDM, ECU and ori MPPS file then contact me. I will help you to solve this ECU ;)

BR

Artilect
26th April, 2013, 11:58 AM
When you will conect the BDM, the BDM will not recognize the ECU automaticly. You have to choose axactly good driver to read. Othervise you will get only 4kb of EEPROM from the ECU, and you will lost immo and injectors. But its also suitable becouse the (kb content its 2x4kb of same dump :D

Flash its corupted by MPPS but only from the adress where MPPS start reading or writing. So if you readout Flash and combine with MPPS Flash you get all the flash back and ECU its resored :D

I have done this few time already without the problems.

BR

ominimicu
26th April, 2013, 12:07 PM
edc16c34.2 and .3 seem to have these problems with MPPS

xanubysx
27th April, 2013, 05:04 PM
i ****ed this car, i write file with mpps ands noe car not starting :(Must read ecu with bdm, and after use mpps file add to full read bdm, yes mpps killed this ecu . . . , mpps erase few lines where the checksum and identification units.To read use fgtech bdm , or china bdm. . .and post your mpps orig,and full crash bdm . . .

ninja123
27th April, 2013, 10:44 PM
thanks for all your help guys, but i dont have bdm or any other tool that can do this, so i will look to but the best et up for the best cost, i see fg tech 2 with bdm and frame plus adaptors on ebay, is this stuff good or is it trash?

Thanks guys

ominimicu
28th April, 2013, 12:07 AM
fg tech 2 is very good, get v54 european version..i dont trust china crap. bdm frame is not mandatory. i like soldering cables directly.