Audi A6 C5 2002 TDI Pin please

[rudidudi]

Hi folks

I want to add a key to the car as I only have one.

Ive managed to program the remote but VCDS requires a pin / skc to login to the immo to adapt additional keys.

Ive not been able to download the ecu / immo / dash eeprom with vag tacho, but have managed to d/l the dash eeprom which ive attached.

VagEepromprogrammer provides a 4 char pin but this is not accepted by VCDS (i've added a leading '0' to make it 5 chars with no success).

Can someone extract the pin that will allow me to login to the immo on VCDS?

Many thanks

[haroutioun]

Hi folks

I want to add a key to the car as I only have one.

Ive managed to program the remote but VCDS requires a pin / skc to login to the immo to adapt additional keys.


Ive not been able to download the ecu / immo / dash eeprom with vag tacho, but have managed to d/l the dash eeprom which ive attached.

VagEepromprogrammer provides a 4 char pin but this is not accepted by VCDS (i've added a leading '0' to make it 5 chars with no success).

Can someone extract the pin that will allow me to login to the immo on VCDS?

Many thanks
Hello.
your pin is 01472. & the km = 150447

[rudidudi]

Thanks.

That's what VagEepromprogrammer came up with - but VCDS doesnt accept this pin in the immo login.

Any ideas?

[rudidudi]

Photo:

http://cdn.imghack.se/images/9b89601858ad0de985a8c2117b2b7fcb.png

I could only d/l the dash eeprom, is this the right pin for the immo?

[haroutioun]

Thanks.

That's what VagEepromprogrammer came up with - but VCDS doesnt accept this pin in the immo login.

Any ideas?
Dear friend try ignition on 30 minute after try again the pin.

[robert81]

check with vcds if immo is locked or not. if you type in incorrect pin 3 times then it locks for sometime.
check channel 024 in measuring blocks in instrument.

[H.Wessel]

hi

pin is ok: 01472, WAUZZZ4B82N150468-AUZ7Z0B2121969.
The car have three programmed keys.

best regards
H.W

[rudidudi]

Friends, the pin worked !

Now to program the key / immo.

Ive found 3 guides on VCDS, how do I tell which one is for my car?

Immobiliser III key matching (separate) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_%28Separate%29)

Immobiliser III key matching (cluster) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_%28Cluster%29)

Immobiliser III key matching (kessy) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_%28Kessy%29)

Thanks guys?

[haroutioun]

Friends, the pin worked !

Now to program the key / immo.

Ive found 3 guides on VCDS, how do I tell which one is for my car?

Immobiliser III key matching (separate) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_%28Separate%29)

Immobiliser III key matching (cluster) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_%28Cluster%29)

Immobiliser III key matching (kessy) (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_%28Kessy%29)

Thanks guys?
Hello.
my friend, the second one immo 3 key matching (cluster) adaptation 10 after use Chanel 21

[rudidudi]

Thanks haroutioun

Will i need to buy a new transponder (ID48?), as the key was second hand from ebay....

thanks for your help

[haroutioun]

Thanks haroutioun

Will i need to buy a new transponder (ID48?), as the key was second hand from ebay....

thanks for your help
Hi,
yes more guaranty buy new transponder > (id48 crypto).
good luck...

[rudidudi]

I bought a new ID48 (T6) chip and it worked first time :)

1. Open VCDS
2. Select 17 - instruments
3. Login > enter PIN (SKC)
4. Check measuring block 22 for timeouts and block 24 to ensure key (transponder) is compatible
5. Adaptation menu > block 21 > change number to number of keys to be programmed > Save

The key in the ignition programs immediately ( the immo lights goes out on the dash ), pull out key, insert next key, immo light goes out. Job done both keys programmed.