View Full Version : Camry 2011 add key
subas
18th April, 2013, 07:59 PM
hello,
please help add the key Camry 2011
Key ID 7E 36 A4 80 F2 4A 49 06
immo 89780-06011 625050-000
thanks.
siyadk
19th April, 2013, 01:00 AM
post a key of 4d 67...anything starting with 32,52 or b2
which is key ID u posted..PCF735(id:46)???...this wont work on toyota
subas
19th April, 2013, 08:44 AM
post a key of 4d 67...anything starting with 32,52 or b2
which is key ID u posted..PCF735(id:46)???...this wont work on toyota
this is new G chip transponder key for Toyota. I post key id in the evening.
subas
19th April, 2013, 09:34 AM
I try this key id 7E 52 72 14 67 5d E6 06
but security indicator still blinking .
gwee
19th April, 2013, 11:07 AM
I try this key id 7E 52 72 14 67 5d E6 06
but security indicator still blinking .
key added, try and report
subas
19th April, 2013, 01:24 PM
Thanks, but not working
subas
19th April, 2013, 01:38 PM
with this dump security lamp turns off, but engine starts ant stop. on immobilizer ecu no fault codes on engine ecu fault code B2799.
gwee
19th April, 2013, 01:47 PM
Sync for 30 mins
subas
19th April, 2013, 02:36 PM
Already try,but the same. For the first time i reset immo with Toyota commander , then readed dump with programmer, meybe dump corrupt?
gwee
19th April, 2013, 03:29 PM
try with this reset dump.
subas
19th April, 2013, 04:18 PM
not working. Meybe possible immo off.
gwee
19th April, 2013, 05:23 PM
-------------------------------------
gwee
19th April, 2013, 05:45 PM
try this immo off m8
cjawahir
19th April, 2013, 05:45 PM
hello install this file , and see if light comes on solid then add key .
cj
subas
19th April, 2013, 07:04 PM
hello install this file , and see if light comes on solid then add key .
cj
then insert key lamp blinking same as without key.
cjawahir
19th April, 2013, 07:22 PM
ok try this and see if light comes on solid .
cj
subas
19th April, 2013, 07:27 PM
for Yaris 2010 reseted dump looks like this, but for camry not work.
subas
19th April, 2013, 07:53 PM
ok try this and see if light comes on solid .
cj
then no key light on, then add key light flashing double pulses with a break. Engine starts and stop.
cjawahir
19th April, 2013, 08:01 PM
can you read the dump now and post for me ..
cj
subas
19th April, 2013, 08:15 PM
readed dump
cjawahir
19th April, 2013, 08:31 PM
here is the file ready to start the vehicle .
cj
subas
19th April, 2013, 09:03 PM
security light flashing and car not starting.
keygargoil
22nd April, 2013, 02:11 AM
you need only a page 1 32, 52 or 92 id 67b chip for this immo not a g chip also there isnt any immo off for toyota when you are bridging 4 and 13 is the dash lights flashing to indicate that it is learning if no try 5 aned 13
subas
22nd April, 2013, 01:45 PM
when i bridging 4 and 13 the dash lights flashing ,but after 35min. the same engine start and stop . Security lamp off. wires from immo ecu to engine ecm ok.
darius89
14th August, 2013, 11:34 AM
Where immo ecu located ?
ray-ray
14th August, 2013, 04:22 PM
Ck100 program will do it by the obd2 and price has drop down to $400.00 16min. Reset time with no breaking down the system. Adding a key only takes 1min. If you have a master.
Automat
14th August, 2013, 04:57 PM
Always good news when there is a price drop, is it still the one that actually works though?
gwee
18th August, 2013, 04:52 AM
Ck100 program will do it by the obd2 and price has drop down to $400.00 16min. Reset time with no breaking down the system. Adding a key only takes 1min. If you have a master.
Now many tools can reset within few seconds instead of 16 mins.
ray-ray
18th August, 2013, 05:59 AM
Post the link to quick reset tool for toyota "G" I would like to test it and post my findings.
gwee
18th August, 2013, 07:36 AM
Post the link to quick reset tool for toyota "G" I would like to test it and post my findings.
Sorry, what i meant is for 4d, CK100 can reset toyota "G"? Please advice. Thanks
AUS-MAN
18th August, 2013, 11:18 AM
Sorry, what i meant is for 4d, CK100 can reset toyota "G"? Please advice. Thanks
I think it would only work in the US market.
bram380
18th August, 2013, 12:54 PM
I try this key id 7E 52 72 14 67 5d E6 06
but security indicator still blinking .
Use this dump and start cars with key 7E 52 72 14 67 5d E6 06
elmaalouf
18th August, 2013, 02:12 PM
did u tested Bram380 dump's? post result pls
ray-ray
18th August, 2013, 04:53 PM
Yes tested ck100 CAN program toyota "G" keys and also program the keyless entry remote. I also did a smart key reset on a used proxy "Prius" 16min. Proxy and remote program together.
elmaalouf
18th August, 2013, 06:05 PM
does ck100 can program a g key i all keys are lost?
elmaalouf
18th August, 2013, 07:13 PM
or it can work only to add key ?
ray-ray
18th August, 2013, 10:36 PM
It does them both (reset 16min. Add 1:20min.)
darius89
16th September, 2013, 07:25 AM
Hi, i have problem with camry and rav4 2011 USA. Tried to program keys with CK100 but unsuccesfully . Did 16 min immo reset , and programmer started safety access procedure... and says max 1 minute. I waited 50 min and disconnected programmer. Now when connected programmer to try again I got message ecu not found. and same on both cars. How to program now ???
elmaalouf
16th September, 2013, 07:34 AM
Hello yesa I got the same message but afterthat I opent the ignition and wait for 2 minutes the security light stay on after that it goes off and all is done
Thanks
darius89
19th September, 2013, 08:26 PM
Waiting nothing changes.. same situation ecu not found. Going to remove immobox, then load any oryg dump from other car and try again to program
keygargoil
20th September, 2013, 12:15 AM
sounds like it has reset it wrong
new files are needed for immo and smart id box
darius89
20th September, 2013, 07:11 AM
what is smart ID box ???
My both cars Camry 2011 and rav4 2011 have blade key
elmaalouf
20th September, 2013, 07:23 AM
So no smart I'd box but it should work if u can post the immo box numbers may some of us can help u with immo dump cuz it should work
Thanks
darius89
24th September, 2013, 11:29 PM
Hi, please help with immo problem. all keys lost.
I TRIED TO program keys with new sk100 2 cars.
camry 2011 and rav4 2011 both cars now have problem with immo diag says immo ecu not found, ecu says no communication with immo , on both cars.
Now trying to fix first car
Toyota Rav4 2011 89780-0R030 immo ....
Does anybody have oryg dump or virgin for this immobox please ???
My dump looks damadged with sk100,
Now I think only way to fix is , to find same immobox dump then to add mannually and then syncro with ecu to bridge pons ??? am I right
http://www.digital-kaos.co.uk/forums/f178/toyota-rav4-2011-g-chip-89780-0r030-immo-problem-369967/
elmaalouf
24th September, 2013, 11:38 PM
I did it many time with ck100 woth success did u tried ur ck 100 on other cars before?
darius89
25th September, 2013, 05:30 AM
hi, on 2 cars , opel and ford focus works ok. on 2 toyotas camry 2011 and rav4 2011 not, but muibe it happens because I stopped procedure..... waited only 35-45 minutes. now I vant to write good immobox dump and try again.....
darius89
29th September, 2013, 05:49 PM
Still cant find find immo file
elmaalouf
29th September, 2013, 06:32 PM
Pls post again immo numbers may we can help or the photos of both immo's
Thanks
darius89
30th September, 2013, 07:08 AM
Toyota Rav4 2011 G chip
Immobox 89780-0R030
http://www.digital-kaos.co.uk/forums/f178/toyota-rav4-2011-g-chip-89780-0r030-immo-problem-369967/
Airbagtech
20th May, 2017, 07:41 PM
I have a question I have a 2011 Toyota Camry I'm posted bellow for help, same as everyone all keys lost. the Immo was water damaged no communication, so I got a used one, and my T300 is automatically jumping into type 4, so can it be a type 4 i dont know, so Im posted the immo's. The old immo was 89780-06050 and the used replaced one is a 89780-06011 so is this a type4 or G? thanks Louie
narkeleptk
20th May, 2017, 09:52 PM
I have a question I have a 2011 Toyota Camry I'm posted bellow for help, same as everyone all keys lost. the Immo was water damaged no communication, so I got a used one, and my T300 is automatically jumping into type 4, so can it be a type 4 i dont know, so Im posted the immo's. The old immo was 89780-06050 and the used replaced one is a 89780-06011 so is this a type4 or G? thanks Louie
your answer is here:
http://www.digital-kaos.co.uk/forums/showthread.php/596080-Toyota-G-Chip-Immobilizer-Reset-Free?p=3034919&viewfull=1#post3034919
Airbagtech
6th June, 2017, 07:24 AM
I'm learning, so does anyone know if my G dump does get reset will my new SKP-900 be able to program a new master key. At this point the G option only had 2 option ad key, and erase keys, but both options need the master key which I don't have. thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.