PDA

View Full Version : NISSAN X-TRAIL 2,0 DCI



mtronik
21st April, 2013, 08:58 AM
hello everyone I need the original file to ECU engine nr.0 281 013 874 (1037387003 1037391315)I have such a problem, no errors, the starter motor turns but does not catch fire.

assitutto
21st April, 2013, 10:18 AM
recode injector

ominimicu
21st April, 2013, 11:22 AM
I had this nissan quaskai, that without injector coding, started, but will not go past idle.

assitutto
21st April, 2013, 01:02 PM
last mounth when i do dpf off in xtrail after write i lost injector coding and car don't start

mtronik
21st April, 2013, 07:37 PM
Tomorrow will try to encode injection
galletto v2 has the capability of encoding injections

assitutto
21st April, 2013, 08:20 PM
you need diag, galleto can recode injector if you haven.t read before

mtronik
21st April, 2013, 08:57 PM
I have read flash as a k-line and can, as I read the injector codes in the file k-line injector codes are stored

ominimicu
21st April, 2013, 09:35 PM
are you sure you have the inj codes. my magpro saves injectors file separately

mafani
21st April, 2013, 10:11 PM
I have read flash as a k-line and can, as I read the injector codes in the file k-line injector codes are stored
nella flash non salva i codici iniettori ma prima di leggere dovrebbe farti salvare il file .inj

mtronik
22nd April, 2013, 11:39 AM
programmed with the file codes of nissan qashqai and nothing grabs but not start

ominimicu
22nd April, 2013, 01:54 PM
quaskai no mate...why?? each injector has its code. If you dont have them. just pop the hood and read them, each injector has its won coded written on it. make sure you get the right order. Order matters

mtronik
27th April, 2013, 06:03 AM
engine fired, auto, long happened, only to haul.
thanks and best regards

pulsar2000
22nd June, 2014, 08:26 AM
Same thing just happened to me, even tho fgtech says inj code supported, so i didnt back up, :<
thimk you can use renault inj code function in fgtech,,,, as nothing listed under nissan for inj codes,
1st important thing use the real key as fgtech mentions, but isnt clear, you need to open fob, put real key in ignition !!
if it fks up on you you well get 2 errors inj codes, and bcm immu chain of command or similar,
as stated, recode injectors and immu error will clear, we used nissan consult, not many tools seem to code these even snapon,,, once codes all back in your good to go,
OMINIIMICU have your skype on tomorrow, you have a BDM from this car, DPF off please sir,,,,
BDM from here on on these :top: