Opel Fronterra 1999, 3.2 29F010, need immo off

[rtr989]

I try with aetool and immokiller, but not work...
Please help!
Thanks!

[helmi reguig]

incorrrect file size!!!

read 24c04 poste dump e try off

[motortecnica]

hello friend, to be more precise you can post model number and ECU unit?

[rtr989]

here is photo, there is no 24c04, only 29f010

[motortecnica]

hello friend, you must do this procedure with this file that I am attaching ...


1) Unzip the file


2) Program the EEPROM 29F010 virgin with the file attached


3) Replace it with the ORIGINAL


4) Turn the ignition for 30 seconds


5) Switch off the ignition and replace the EEPROM ORIGINAL

[rtr989]

hello friend, you must do this procedure with this file that I am attaching ...


1) Unzip the file


2) Program the EEPROM 29F010 virgin with the file attached


3) Replace it with the ORIGINAL


4) Turn the ignition for 30 seconds


5) Switch off the ignition and replace the EEPROM ORIGINAL
sorry, this not work... now engine lamp on dash blinking, engine not start without chip on key. with chip it starts normaly but engine lam still blinking.

[motortecnica]

you turn on the machine, but it remains just a flashing light?

[rtr989]

you turn on the machine, but it remains just a flashing light?
i turn ignition on and checkengine light start blinking, engine starts but light continue blinking...
anyway immo is still present...

[motortecnica]

if the machine is in motion means that there is no immo, immo off some normal and it stays lit the lamp in the instrument cluster queues!

[rtr989]

if the machine is in motion means that there is no immo, immo off some normal and it stays lit the lamp in the instrument cluster queues!
if i remove chip from the key, engine not start.

[rtr989]

Please help with this job!

[rtr989]

+++++++++++++++++++++++

[rtr989]

Now engine don`t start!
i have this errors from ECU: P1649 Theft immobiliser not programmed
and from immo: B8007(0) Engine request not received

checkengine lamp blinking and engine don`t start...

[rtr989]

hello friend, you must do this procedure with this file that I am attaching ...


1) Unzip the file


2) Program the EEPROM 29F010 virgin with the file attached


3) Replace it with the ORIGINAL


4) Turn the ignition for 30 seconds


5) Switch off the ignition and replace the EEPROM ORIGINAL

Your file fills by FF's all of mc68hc11f1 EEPROM, now engine starts, but only 25 times, in EEPROM at 0074 address presents counter, then i first start engine it writes 18(24), then 17(23), 16(22), 15(21) and it count down to 00, after that engine is not start...then i put at 0074 address "FF", i have another 25 times for starting engine..
i disassemble the flash file with ida, but can't find entry point, and can't find there is immo chek, is some one can help?