PDA

View Full Version : Airbag VW10 5N0959655J help



ruffles1986
22nd April, 2013, 09:34 PM
Hello i have a airbag unit VW10 5N0 959 655J, i look in forum i must read 95640 eeprom, but i try to read 2 eeprom smd with wellom programer and with carprog and i can't read... throw all FF or 00 ....

Wellom and carprog work well with 95640 eeprom from Astra H Radio.

194404
Which eeprom i must read? eprom is facked?
Can any one help me please, very thanks in advance.

Edited Note: I clean carefully film protect

ruffles1986
23rd April, 2013, 05:10 PM
Nobody can help me??

strato
24th April, 2013, 08:09 PM
Your CarProg read 5K0 959 655,but yuo need 5N0 959 655!!No chance Friend.Wellon programmer good tool,but something is wrong?
Chip must be clean 100%!Regards

ruffles1986
25th April, 2013, 01:03 AM
I read with carprog clip eprom, but not with airbag function, i used direct eprom for read. With wellon the eprom marked on left of picture detect all 8 pins, but i belive is not 95640 for this all is FF or 00, the eprom marked on right of picture wellon no detect 3 pins, and i can't read. (appears that this ****ing)

Can any send me file for two eprom and numbering of each??? (Cleared Please)

mcm44
25th April, 2013, 02:43 PM
EEPROM is marked on this photo...

ruffles1986
25th April, 2013, 03:10 PM
Ohhh, I did not think of the format TSSOP... I just check that you're right.

Can you help with the files of the other two eeprom marked in the picture? Now i need check thease to see all is correct. And numbering eeprom for programming

mcm44
26th April, 2013, 03:09 PM
There is only one EEPROM, 95640 TSSOP...

ruffles1986
26th April, 2013, 07:00 PM
There is only one EEPROM, 95640 TSSOP...

I mean the other two 8SOP eeproms than I tried read, which I have marked on my photo. can you help me with thease?? i need checking if all is ok after handle....

mcm44
27th April, 2013, 08:28 AM
No, I can't help with this. I never do not need to touch anything else... But I'm pretty sure, that there is no other eeproms on this board... Write down marks from those 8SOP?

ruffles1986
27th April, 2013, 08:43 PM
I touch this because i don't thought in 8tssop and try to read the other two eproms 8sop and now i have the problem...., one eprom is wrote on side up 6250 PG G0936 and LYQVE84 8651 ond down said, and other 63656 27k c093R only on up said. I don't know this mask.

mitch2
28th April, 2013, 12:25 PM
I touch this because i don't thought in 8tssop and try to read the other two eproms 8sop and now i have the problem...., one eprom is wrote on side up 6250 PG G0936 and LYQVE84 8651 ond down said, and other 63656 27k c093R only on up said. I don't know this mask.
Is tssop (more small) like marked photo

mcm44
29th April, 2013, 08:23 AM
I touch this because i don't thought in 8tssop and try to read the other two eproms 8sop and now i have the problem...., one eprom is wrote on side up 6250 PG G0936 and LYQVE84 8651 ond down said, and other 63656 27k c093R only on up said. I don't know this mask.

6250 PG G0936 LYQVE84 8651 = Infineon CAN Transceiver, 1Mbaud, 8-SOP, 5V

I can't find what the other part is, but it is not EEPROM - just solder it back...