PDA

View Full Version : EDC16CP via BDM



zeljolaki
22nd April, 2013, 10:01 PM
HI

I need pin connection for ECU BOSCH EDC16CP (Audi 3.0tdi).
I am connected as the attached picture but I get the message:
"Power error or communication error (E14)"
Can you please advise what is wrong.
Thanks

pablo1971
22nd April, 2013, 11:34 PM
i have not done this ecu directly.but i would treat this as a normal edc16 bdm connection.so if your having problems,i would try your equipment on another ecu.


i always have a pile of ecus that i use first before connecting a customers ecu up.....weird i no....but i like things to be correct.

veloseeped
22nd April, 2013, 11:54 PM
i have not done this ecu directly.but i would treat this as a normal edc16 bdm connection.so if your having problems,i would try your equipment on another ecu.


It's strongly recommended to check all connection cables and bosch-converter board of equipment before testing on another ecu.
For example some china clone galletto2 have wrong installed connector on bosch board. As a result - burned BDM-port on MPC5xx.

zeljolaki
23rd April, 2013, 03:10 PM
Solved!
Thanks for all!

spitt
28th December, 2017, 05:37 PM
Hello. I am having the exact same problem. How did you solve it? Thanks

dtip
28th December, 2017, 06:16 PM
Hello. I am having the exact same problem. How did you solve it? Thanks

Try connecting +12, ignition and GND on ecu pins instead on bdm...

495543