EDC16CP via BDM

[zeljolaki]

HI

I need pin connection for ECU BOSCH EDC16CP (Audi 3.0tdi).
I am connected as the attached picture but I get the message:
"Power error or communication error (E14)"
Can you please advise what is wrong.
Thanks

[pablo1971]

i have not done this ecu directly.but i would treat this as a normal edc16 bdm connection.so if your having problems,i would try your equipment on another ecu.


i always have a pile of ecus that i use first before connecting a customers ecu up.....weird i no....but i like things to be correct.

[veloseeped]

i have not done this ecu directly.but i would treat this as a normal edc16 bdm connection.so if your having problems,i would try your equipment on another ecu.


It's strongly recommended to check all connection cables and bosch-converter board of equipment before testing on another ecu.
For example some china clone galletto2 have wrong installed connector on bosch board. As a result - burned BDM-port on MPC5xx.

[zeljolaki]

Solved!
Thanks for all!

[spitt]

Hello. I am having the exact same problem. How did you solve it? Thanks

[dtip]

Hello. I am having the exact same problem. How did you solve it? Thanks

Try connecting +12, ignition and GND on ecu pins instead on bdm...

495543

[trollowiec]

helo
I also have a problem with the ktag clone and bdm100 clone edc16cp34 audi a4 b7 3.0tdi
connection I tried to give 12v and gnd on pins but it doesn't work.
Does anyone have a solution for this?