alfa 147 bsi xprog connections needed

[ninja123]

hi, i need to make a transponder for a alfa 147 tomorrow, customer smashed key :(

I have a picture of how to connect to bsi but dont know what pins on xprog m to connect to?

Any help would be fab, thanks, ninja

if have this pic from yellowstillo - but i dont know which pins on xprog to connect to

[yellowstilo]

i just replied to your PM - B3 to BKGD, B5 to reset , VCC and GND will be no problem i guess.....I Always use UPA which i think is more user-friendly than Xprog....good luck !

[ninja123]

thanks bro, you the man!

ninja

[ninja123]

I did this alfa today, i read as yellostillo described, used x prog m, it would read but verify failed every time.

I ran dump in zedbull and i got pincode, and pre coded a 48 transponder, I didnt want to write image file back to mcu due to verify error when reading.

But all worked ok, programmed with SBB and all good, thanks for your help.

What is best programmer for auto use, orange or upa? Its become obvious that x prog is not that good, I have quite a few problems with it :(

ninja

[yellowstilo]

A v1.2 UPA clone works ok for little money, i think Orange is a very good programmer but it will cost much more than a UPA?

[geeroam]

hi guys i am also busy with a could you please help me with xprog connection points attached is picture of bsihttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307144&stc=1

[unu]

better to connect on the backside of board ... see first post of this thread.

[geeroam]

Backside Looks different, or maybe im not looking at it correctly

[ninja123]

see here, other member posted this years ago:

[yellowstilo]

see here, other member posted this years ago:

I posted it, it's a DG128 Stilo body computer - the Alfa BC might be a DG256 one which has a different pcb....

Edit - the connections of the last pictures are ok for your pcb....

[geeroam]

Thanks ninja stillo will try and post results

[geeroam]

Works Guys thanks but getting verify error, vehicle not with me. opened dump with zedbull and effi, recognises dump just scared to write beack because of verify error

[yellowstilo]

use UPA instead of X-prog....

[paul_12345]

instead of verify just do 2 reads and use hexcmp to compared the files

[geeroam]

No upa have r270?

[geeroam]

Thanks for the help guys, used Pauls tip compared files had many differences, I have 2 identical xprogs with dongle updated one of them but still continue to use the old one, old one gave me verify error. wipped out the one with Siera update 5.55 read perfectly. Thanks for all the help Gents.