Volvo FH12 truck chiptuning galletto

[elcarpuz]

Hi, anybody know if galletto can do TRW ecm by pinout on FH12 D12D194815 same ecu on picture

I test with bytheshooter pinout but when alimentation ON i can see power station default, can you confirm pinout?

[zsoltika]

Hi!

The pinout is OK, i test it with BS many times...

BR!

zsolt

[elcarpuz]

Do you know what is colour wire on galletto 2 for H and L

i think H is yellow and L is blue, can you confirm?

[elcarpuz]

12v or 24v?

[elcarpuz]

I have retested, with same connection byteshooter with my galletto, and when i press ON, on my power supply, i have short circuit...tested in 12v, i do***324;t test in 24v because i think same problem

[alclot]

Hi friends. I take your post. I have a fgtech V54 clone and not as I can make Volvo trucks with TRW ecu. Why do so by OBD need to put some adapter or use some pinout? Is it only with the unit can be done without opening it?
Thanks in advance ;)

[Babos]

Check manual!! there must be write step by step!

[alclot]

Check manual!! there must be write step by step!

Hi again. I can do it bdm. I tried it and perfect. The problem I have for OBD and manual not clear to me, and I'm afraid to create some short.
Thanks in advance ;)

[Babos]

In manual is show if you have tool before 2012 you must use adapter if you have up to 2012 you must unplug stardart adpater and use volvo renault adapter.

[chiptuner8]

Do you know what is colour wire on galletto 2 for H and L

i think H is yellow and L is blue, can you confirm?

Orange is CAN-L and Blue is CAN-H

[gabor424]

help pls. Volvo FH12 lucas d12c 2000yahr too same handout pins? gallettov54

[elcarpuz]

Yes all Lucas, same pinout

[gabor424]

What volvo truck pinouts? (8pin obd) there too read/write?