PDA

View Full Version : mpc 561 or 562



aslamaslam
30th April, 2013, 07:43 PM
hi every body
about the MPC561 or MPC562 i tried to read it by x-prog and galleto masterby bdm but i cannot read it so if it is protected how can i delete this protiction and in which device i can read it and what is the solution
Is the galleto master can read this kind of mpc by obd2 please help me and reply 195903

veloseeped
30th April, 2013, 09:42 PM
i can read it and what is the solution


MPC561/562 are romless MCUs...there is nothing to read inside :biggrin:

aslamaslam
1st May, 2013, 07:57 AM
MPC561/562 are romless MCUs...there is nothing to read inside :biggrin:

must be read
read it because the ecu of the original car malfunction
I want to programming another ecu
ican to read ext flash and eprom but i cannot read the ent micro flash(mcp561) edc 16c39
MPC561/562 are romless MCUs...there is nothing to read inside :biggrin:

camil
1st May, 2013, 08:36 AM
Veloseeped told you, you cannot read something that dont exist, those mpc don't have internall flash, just external.

aslamaslam
1st May, 2013, 09:47 AM
195970I'm sorry
I mean when you change the ecu edc16c39 enough readers eprom and ext flash not need to read flash Micro?

camil
1st May, 2013, 08:56 PM
Exactly, you understood well now.

gezame
2nd May, 2013, 12:31 AM
Hi
Then, can explain why if you clone one ecu with mpc562-mpc561 micro, normally the car starts but gives many failures, fans running, etc., etc.
Only works ok, if ecu clone is same ref hardware that original ecu.
Br.

camil
2nd May, 2013, 08:26 AM
Hw means hardware.

Maybe if you put another hw reference ecu it doesn't have inside components to control/manage sensors,actuators, etc that the donor car has and yours not maybe are different and that is why you experiment some nasty faults.