Best device for read EZS 908 ???

[Rito]

Please share feedback about device for read Mercedes EZS HC908 in CIRCUIT??

-enigma can?t read mask 1J35D
-R270 is good, but had damage 1 ezs to me.
- Ak500??
-Orange5??

Thanks

[Fallen]

Have a look at the ETL programmer, not sure if it can do in circuit on ezs though.

[benzstop]

Have a look at the ETL programmer, not sure if it can do in circuit on ezs though. etl can do some masks in cicuit id=f you use revo adapter

[Rito]

etl can do some masks in cicuit id=f you use revo adapter

Etl in circuit??How?? I havbe ETL and must desolder mcu and solder in adaptation for read...

[rrador]

Smok programer claims to them in circuit, has anyone tested it? I am ordering one today so we will see.

[ttzag]

hi
today i read 1j35d (w220) with r270 , its read it 100% good.

can r260 the blue one read 908 in ezs ??

[Rito]

hi
today i read 1j35d (w220) with r270 , its read it 100% good.

can r260 the blue one read 908 in ezs ??

R260 is only for 912/9S12.....

[Rito]

Any feedback about others tools for HC9008 in circuit??

Thanks

[carbandit]

Smok programer claims to them in circuit, has anyone tested it? I am ordering one today so we will see.

yes smok jtag programmer can do this in circiut ..pm gijsvm and he will get you discount...

[gogalv]

Please share feedback about device for read Mercedes EZS HC908 in CIRCUIT??

-enigma can?t read mask 1J35D
-R270 is good, but had damage 1 ezs to me.
- Ak500??
-Orange5??

Thanks

1. Orange5. (search SS)
2. Omega. (search SS)
3. ETL 908. (search SS)

Other non-search SS.

[davecooper47]

My R270 is brilliant for 908's & 9s12's. much faster than blue Rosfar.

[Rito]

yes smok jtag programmer can do this in circiut ..pm gijsvm and he will get you discount...

You have feedback about it???
Because some HC908 in ezs is so hard to read...
Who are gijsvm?

Thanks

[carbandit]

yes i have smok and does this mcu 1j35d mask no probs ....gijsvm is member here on dk and reseller for smok who give us members discount
http://www.smok.com.pl/index.php?lang=en&id=oferta&kategoria=3&produkt=57

[Rito]

yes i have smok and does this mcu 1j35d mask no probs ....gijsvm is member here on dk and reseller for smok who give us members discount
SMOK (http://www.smok.com.pl/index.php?lang=en&id=oferta&kategoria=3&produkt=57)

Many thanks your Help, So But it can read in circuit 2 mcu? R1 and R2, or only 1??
I will contact him..
Thanks

[aposig]

ORANGE 5 IS THE BEST FOR HC908 MCU!!!!!!!!!!!! IN CIRCUIT OK ,AND ONBORD OK

[enigmauk]

Smok programmer for 908 works brilliant ;)

[Rito]

I bought Smok Jtag for read HC908...

I not have success to read EZS 1J35D...
Someone can help??

220930
220931

[ilian_cho]

ORANGE 5 or OMEGA is best for read ij35d. But when you read and write flash to make clone work slowly rfom etl

[pepi]

I never had problems reading it with ETL.

[Master01]

SMOK programmer works brilliant ? hahahaha :D :D F*cking SMOK

[Rito]

SMOK programmer works brilliant ? hahahaha :D :D F*ckin SMOK

In mask 1J35D and read ok 2 mcu??
You connect all OSC to pcb??

[Zaveruha]

UPA is a good programmer to read all 908 mask, but you need know SS.

[Rito]

UPA is a good programmer to read all 908 mask, but you need know SS.

I am talk about read in circuit.. In UPA you must remove mcu.....

[PremierD]

Think maybe you are thinking about ETL mate ..not upa :)

[brkic6]

I am talk about read in circuit.. In UPA you must remove mcu.....

Noooooo! :beheaded:
Upa CAN read 908 online, if mcu mins configured ok, and if you know SS!!! (if MCU locked).It is invented by Penko to do it online! ;)
But, my opinion is that ETL is best tool for 908, I remove it from board often. But in combination with UPA and known SS...you have winning combination...

[einet]

for this is SS
$E5 $DD $E4 $0A $67 $2B $E5 $DD

[aassfour]

the only tool that never failed me on circuit, Orange5

[Rito]

You test it??
About Jtag smok any more feedback about??
I not have success yet in 1J35D in circuit......

[ttzag]

the only tool that never failed me on circuit, Orange5

+1

Sent from my Nexus 4 using Tapatalk 2

[yugo45]

You test it??
About Jtag smok any more feedback about??
I not have success yet in 1J35D in circuit......
Contact Smok and report this .
It should read it.

[einet]

UPA cables less that 5cm.
USB cable not from scrap a very good cable with TCO99 norm
this norm have 2 big magentic on etch ends off the cable.
Use USB port from the back off the pc not the on the front! this normal have less power and have most
a usb hub internal.

[buga37]

I bought Smok Jtag for read HC908...

I not have success to read EZS 1J35D...
Someone can help??

220930
220931

read this, now you will have a problem returning this peace of junk http://www.digital-kaos.co.uk/forums/f172/smok-service-problems-any-advice-please-371125/

[Rito]

read this, now you will have a problem returning this peace of junk www.digital-kaos.co.uk/forums/f172/smok-service-problems-any-advice-please-371125/?highlight=smok (http://www.digital-kaos.co.uk/forums/www.digital-kaos.co.uk/forums/f172/smok-service-problems-any-advice-please-371125/?highlight=smok)

This is not a post..
Send-me post please..

Thanks

[buga37]

I've updated the link, try now

[detayoto]

no no no
Examine best friend pdf files.
Before reading, you need to put the gray end of the cable resistance of 10 k.
enigma does this job well.
a good device but not enough

[Rito]

Someone know conections fo r270 in EZS Vito ??
Smok can?t read mask (4j74y)

254521

[mercis]

see manual r270
with upa can you easy read vito

[Rito]

Do you have for MCU R2? I want for keys not for km..
Thnaks

[mercis]

see upa manual,connect same to r1

[buga37]

I bought Smok Jtag for read HC908...

I not have success to read EZS 1J35D...
Someone can help??

220930
220931
just found on there website that adapter must be used for 908

Programmer HC08/HC908
It operates all Mercedes EZS, among others secured 4J47Y and 1J35D in ignitions W203, W220 Sprinter with 2L52H ,1L52H.
Programmer operates also 2J74Y, 3K85K,0J66D,1H56A,1L87J
All units operated without soldering out.
Read/write EEPROM.
It requires usage of the adapter in position ON, between JTAG programmer and connection cabel (included in price)

[cheester]

see manual r270
with upa can you easy read vito

I can confirm, upa clone working 100%

[Rito]

just found on there website that adapter must be used for 908

Programmer HC08/HC908
It operates all Mercedes EZS, among others secured 4J47Y and 1J35D in ignitions W203, W220 Sprinter with 2L52H ,1L52H.
Programmer operates also 2J74Y, 3K85K,0J66D,1H56A,1L87J
All units operated without soldering out.
Read/write EEPROM.
It requires usage of the adapter in position ON, between JTAG programmer and connection cabel (included in price)


If you see my picture I use adapter, What I make wrong I don?t undestand??

[buga37]

If you see my picture I use adapter, What I make wrong I don?t undestand??

I would say try desoldering it

[Tetris]

I read 0L01Y with ak500+, but only EPROM

[robert54]

Hi MAte it's Very Very good tool for hc908 Elektronika samochodowa E-TRONIC (http://hoth.amu.edu.pl/~pawcio/index.html)

[gjuzel]

Hi MAte it's Very Very good tool for hc908 Elektronika samochodowa E-TRONIC (http://hoth.amu.edu.pl/~pawcio/index.html)
hi m8 I CANT SEE any image wiith programmer.??