PDA

View Full Version : Citroen C4 1.6hdi edc16 c34 lost injector code's



obnchip
4th May, 2013, 08:25 AM
Is is possible after flashing the mod file to lose the injector code's?Flashed with fgtech2.I have done some of edc16 c34 ecu but never lose code's....

kennfeld
4th May, 2013, 09:47 AM
yes it's offten the case that you should loose the injector codes
you must read the car configuration in eeprom before you try to read and write flash
you can lost lot more as injector codes
you can also loose tempomat or speedlimiter and other options

guille_masco
4th May, 2013, 07:38 PM
After flashing, turn off ign, then wait 2 minutes (usually the time it get to turn off odometer backlight). Then turn ign on to start engine. And you will have no problems..

obnchip
5th May, 2013, 08:48 AM
yes i did i was following galletto's instruction's...
but i did not read before the configuration
bosch kts can recode it?or only official citroen lexia?

lucim12
5th May, 2013, 11:52 AM
same happen to me, bought a lexia 3, recode injectors , problem solved !

budG60
9th August, 2013, 03:54 PM
Lexia will help you to solve the problem, but next time just wait 30 minutes before putting the ignition on again and it will be fine. I have faced the same problem with galletto 2 and ohter tools and I found out that when I wait a long time before switching on the ignition the codes will stay fine.