volvo dpf off 5ws40212g sid 803

[cange]

hi can somewhone swich off dpf on this ecu 196526196527

[assitutto]

i think you read this file with slave tool and is not good

[bmgadam]

Post org file here, and after flash, you must disconnect DPF ecu(he is in rear seats)

[cange]

i used xprogm via bdm not good?

[cange]

Post org file here, and after flash, you must disconnect DPF ecu(he is in rear seats) i did posted original flash in first post

[cange]

so anyone can help my? please

[assitutto]

i repeat, for me your file is not good read

[cange]

i repeat, for me your file is not good read


which tool you want that i use?

P.S. i tried to read it with xprogm 6 times and allways get same dump.

[taurius]

You have read flash memory.
FAP switch is in mpc memory on this ecu.
MPC file should be 452kb.

[cange]

whats wrong if i get 448kb only, what im doing wrong?

[Babos]

what tool you use for this job?

[cange]

xprogm 5.0

[cange]

i found on this forum another cpu dump with size 452 diferences from mine is am not reading full dump, am leaving end of it, but this end of the dump is only FF FF FF FF so is it safe to modify my readed dump and write it back?

[taurius]

Shouldn't be any problems with 448kb.
On the other hand - now many people know the dpf switch on this ecu and if it isn't doen correctly - you will have regenerations every 500km.

[cange]

just sorted volvo used this 196937 and Xprog-m