View Full Version : vw caddy 2008 dashboard
myma7up
5th May, 2013, 03:30 PM
i have SAFE appears on my dashboard
so
what it is mean
and how can i clear it
note: the car is not starting
the transponder is missed and i have trying to start the car many times
tiguan
5th May, 2013, 04:30 PM
Make ECU Immo-Off to start, good luck
Maartinj
5th May, 2013, 08:56 PM
Make ECU Immo-Off to start, good luck
SAFE is - NO KEY , so if you make IMMO OFF from ECU you will still have SAFE on Cluster
You need make NEW KEy and IMMo OFF or prepare immo to ECU.
If all is genuine and you have no working key, make new.
myma7up
5th May, 2013, 09:18 PM
I can't read the pin code i think it is because the safe mode
did i think right ??
so what i suppose to do to read the pin code from the OBD
myma7up
5th May, 2013, 09:44 PM
now i try to diagnose the car with VCDS
i have 1176 what dose that mean ??
gttuning
6th May, 2013, 12:28 AM
now i try to diagnose the car with VCDS
i have 1176 what dose that mean ??
what address engine,cluster?
Maartinj
6th May, 2013, 05:44 AM
Post here full error. 99% - No KEY or In-correct KEY / Engine block by IMMO.
After 2007 you will not prepare new KEY via PIN/Login.
Contact me, perhaps you are close to me.
myma7up
6th May, 2013, 08:19 PM
ya there is no key and now i try to read the pin but it is no communication with the dash i think must get out of the SAFE first then i can read the pin
when i need to program a new key by SBB ( security level error )
now i need to now the way to get out of that SAFE
Maartinj
7th May, 2013, 05:15 AM
You can remove IMMO from Cluster but after this controler 25th gone, so ABS and ECU show you Communication error with Immobiliser
Even if you get a PIN you will not to do anyhinng with this.
gttuning
7th May, 2013, 10:00 PM
just add key and jobe done.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.