PDA

View Full Version : Need ori flash Opel Vectra C 1.9 CDTI 150HP



speedfan
6th May, 2013, 05:50 PM
Hi. I need ori BDM flash to Opel Vectra C 1.9CDTI 150HP EDC16C9 HW:0281011915 SW:1037384325

span4o1984
6th May, 2013, 06:04 PM
+45 hps have you got a file for BMW 325 TDS 028100378 or do you know anyone who has it? I really need it! Thanks in advance!

span4o1984
6th May, 2013, 06:06 PM
and this is the original file :)

hyhy
6th May, 2013, 06:19 PM
and this is the original file :)

It isn't file for Vecta C 1.9 CDTI

span4o1984
6th May, 2013, 06:22 PM
it is the same. you won't have a problem.

span4o1984
6th May, 2013, 06:24 PM
if the car is automat you should use OPCOM

speedfan
6th May, 2013, 07:37 PM
I checked your file in winols. It has different HW and SW. I need HW:0281011915 SW:1037384325

speedfan
7th May, 2013, 12:57 PM
Anybody has this file?

assitutto
7th May, 2013, 01:51 PM
best regards

speedfan
7th May, 2013, 02:53 PM
Thanks assitutto. Are you sure it's from 150HP version? (http://www.digital-kaos.co.uk/forums/members/51458-assitutto/)

assitutto
7th May, 2013, 03:17 PM
not sure, sorry

columbo25
8th May, 2013, 11:46 AM
It?s difficult to say what kind of software your BDM-File is when you didn?t read it by your own !

I was analysing some tech2 files from one car that i has programmed as DT, DTL, or DTH. In this Tech2 or also BDM-File are more possibilitys of engine versions. So you will see allways at the end of the BDM-File the Z19DT version also when you programm Z19DTH !

But if you programm assitutto?s file and you read the file with mpps after you programmed, you will see the right file version