PDA

View Full Version : Piasini clone verified cars



Martymonaro
11th May, 2013, 12:21 PM
I have seen many people getting licence for piasini clone so i assume there are plenty of people here who have tried it on many different cars and i thought it would be good to have a list of verified working and not working cars to save someone killing a ecu that someone else has already been through and knows not to do it.

npepo
9th June, 2013, 11:05 PM
RENAULT MeganeII LAGUNAII 1.6 16V - S3000 SH7055 Read/Write OK!
SUBARU Forester 2.0d - DENSO SH7058 Read/Write OK!
NISSAN Navara 2.5dci - DENSO SH7058 Read/Write OK!

pipol87
10th June, 2013, 12:08 AM
Mazda6 2.0d 2007 - DENSO all OK ;)

oskar 7
10th June, 2013, 11:58 AM
mazda rx8 1.3 231cv denso ni por obd ni por cables
si alguien a podido por favor que ponga como
perdon por mi ingles

Yura123
24th June, 2013, 02:13 PM
acura 3.7 2008 DENSO read ok write ok
opel 1.7 denso read ok write ok
Range Rover 4.2 benzin denso read ok write not!!!
Infinity FX35 benzin denso read ok write not!!!

Martymonaro
8th November, 2013, 12:19 PM
Mazda 3 mps gen 1 and mazda 6 mps 2.3 read and write ok.

kennfeld
8th November, 2013, 09:06 PM
mazda rx8 1.3 231cv denso ni por obd ni por cables
si alguien a podido por favor que ponga como
perdon por mi ingles


mazda obd work fine with slave that have master piasini srl

BALI7605
1st December, 2013, 11:47 AM
Guys,

ANyone knows how to read this ECU? I can not find in the Piasini manuals but it listed in the supported cars. Can you do it trough obd??? Need the dpf removed.

Thx

araby80
10th January, 2015, 11:44 PM
RENAULT MeganeII LAGUNAII 1.6 16V - S3000 SH7055 Read/Write OK!
SUBARU Forester 2.0d - DENSO SH7058 Read/Write OK!
NISSAN Navara 2.5dci - DENSO SH7058 Read/Write OK!

could you tell me how you write on s3000 ecu?? i can read but i cn not write

mislav88
11th January, 2015, 03:11 PM
use 470ohm resistor instead of 680

araby80
11th January, 2015, 08:37 PM
I will try and report tomorrow

araby80
13th January, 2015, 07:01 AM
thanks alot mislav88 i put 470 ohm resistor and work perfect ;)