Renault Clio - IAW4nr.c2

[pinheiro]

Hi friends

I have a Renault Clio, 2002, 1.2, 16v With the following ECU:

Magneti Marelli
IAW5nr.c2
8200162381
8200178931

I need to replace the original ECU, that is damaged.
I have allready a compatible ECU, but I need to code it.
The eeproom is a hybrid 95160. How can I read it? Can anyone help me.

Thanks and regards in advanced

Pinheiro

[pinheiro]

After trying to read the eprom with no result I follow the advice of the member bubu782001n and here it is the solution:

First
I have bought a used ecu IW5NR.C5 and program the eeprom with the file in attach.

Second
Then I cut the wire from the connector (red 12V permanent)- as you can see in the picture and INSIDE ECU CONNECT PIN L4 with PIN M4 (see picture in the attach).

]199079199080

[soplillo]

You used another ecu??? from clio??

[pinheiro]

Hi Spolillo,

Yes, I have used another ECU an IAW5nr.c5, because the original eprom of the ECU IAW5nr.c2 is hybrid.

199173199174

[atomiczen]

Hi Spolillo,

Yes, I have used another ECU an IAW5nr.c5, because the original eprom of the ECU IAW5nr.c2 is hybrid.

199173199174
you can read hybrid 95160 with upa, only pin you need on hybrid pcb is pin 1, you find other pins on classic pcb

[DiegoAC]

you can read hybrid 95160 with upa, only pin you need on hybrid pcb is pin 1, you find other pins on classic pcb

Hello mate, have you been successful at that?