View Full Version : A6 2.5TDI 2001y 110KW how to replace VP44 electronic module??
cubica1
14th May, 2013, 07:09 PM
I have to replace only electronic module, but someone is destroy the original sticker plate from the pump :(
It is VIN: WAUZZZ4BZ1N14332
I have old electronic (hereis data I have read on the table)
059 130 106B
C062_2.V70
C062_0.P64
1 469 947 038
0 281 010 479
0 Error
And a newone electronic:
059 130 106J
C150_1.V79
C062_0.P64
1 469 947 138
0 281 010 889
0 Error
How I can know are they changeable?? Is there a immo into electronic?? What is correct procedure to change (in case that it is possible to change old with new)??
cubica
spawns3
15th May, 2013, 02:40 AM
For this year i think u don't have to put the VIN number , but don't forget , that pump is programable on bench for each car , try and see if will work or not , but if u need to put VIN , its easy to do .
Cheers
198325
cubica1
15th May, 2013, 10:11 PM
Thanks a lot friend, I write VIN here only to determine which one mechaninic pump was original...
Meantime, I have solved, old pump works so I do not need to replace it. But, I am still interesting about SW which can change sw inside pump. Where can I find it?' I have only Denis SW for reading main pump details and errors DTC.
Thanka gain, great regards,
cubica
treo
16th May, 2013, 07:19 PM
Make immo off and you can change pump.
cubica1
16th May, 2013, 11:01 PM
immo off where?? :( into pump ?? how?? or you mean into ecu??
which one SW can change SW into pump??
thanks Treo,
cuby
treo
17th May, 2013, 06:25 AM
Immo off in Ecu .
flixuno
19th May, 2013, 08:22 PM
hi!
in 2500 audi 2001 tdi 150hp
no need to encode
in audi 2500 tdi 180hp
if it is necessary to encode
sorry for my English
danhash
29th November, 2013, 09:57 PM
Hi
One my casa I have a :
059 130 106A
0 281 001 371
Should it work with other electronik module? number 0 281 010 479?
Even after programing ecu how user "spawns3" says above
Griunvaldas
29th November, 2013, 10:42 PM
059 130 106B is 0 470 506 006 from 110kW Audi
059 130 106J is 0 470 506 030 from 114/120kW Audi
Difference: with B letter pump is without immo, with J -WITH. Letter J with pilot injection, and so on... They are NOT interchangeable!
danhash
1st December, 2013, 12:13 PM
thanks, I will try to find one with same number
danhash
5th December, 2013, 08:05 PM
Hi
Now i found one with the same 0 281 001 371 (bosch number) but, 059 130 106 D (vw number) not 059 130 106 A (that I have) I think the diference is with Aut or Man gearbox, and the ECU number is 0 281 010 888 and not 0 281 001 371 (that I have).
Can anyone tell me if it works if i change it?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.