SAGEM DBOX2 HELP...

[da14u]

Hi, can someone help me with my dbox, actually all my channels disappeared and I tried to do and autoupdate, was fiddling around and now my dbox would freeze after booting up, it stucks on a channels, remote won't work and it won't let me do anything.

Anyone out there who can help, thanks:bird:.

[Devilfish]

I think if you reflash an image it should come ok.

If you can manage to ftp to the box, copy over an image to /tmp then use the menus to reflash it before it freezes, that should do it.

Or else you'll need to use IFA (Image Flashing Assistant).

[da14u]

Thanks for ur reply...I seem to get stuck after it boots, the loader would load at boot followed by globe spining on LCD and then channel would come up and thats it, it will freeze there with no remote access. I cannot even bring it to standby.

Guessing from this connecting it via FTP is not possible, though I also have a null modem cable which I think will do the job, any other solution out there, thanks.

[Devilfish]

IFA needed to reflash it then, use your null modem cable and ethernet cable when using IFA.

[da14u]

Hi devilfish, thanks for ur reply, I need to know if Neutrino sporster is also known as commando, please can u clarify this, also how do I bring the dbox to standby if freezes and wo'nt let me do anything. I think I need standby for flashing isn't it.

<--da14u added 74 Minutes and 27 Seconds later...-->

Hi devilfish, I tried flashing and successfully came to this stage but it stucks again at boot process@boot net failed, please have a look at the log and see whats going wrong, might be the wrong image or maybe other settings, thanks


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
-------------------------------------------------------------
BootP: Got request from 00509C3B110E
Error DeleteIpNetEntry: The parameter is incorrect.

BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00509C3B110E
BootP: Created ARP-entry with IP: 192.168.0.202 and Mac: 00509C3B110E
BootP: Answer to 00509C3B110E sent
BootP: Got request from 00130290CD39
BootP: Got request from 00130290CD39

------ Extra Informations ------
Selected Network adapter: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport (1)
IP-Adress of the Network Adapter: 192.168.0.3
IP-Adress of the Dbox: 192.168.0.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Genuine Intel(R) CPU T2050 @ 1.60GHz @ 1595 MHz
CPU 2: Genuine Intel(R) CPU T2050 @ 1.60GHz @ 1595 MHz
Filename of the Images: CableFerret_Official_Image_1xI.img
Imagetype: One Flash
DBOX-IFA Version: 3.1
------ Powered by http://www.dboxservice-hallenberg.de ------

[gorfit]

good forum.thanx guys for all good work.
my sagem dbox misses some channels, i want to reflash it area nwest,need help guide.

[DW190]

good forum.thanx guys for all good work.
my sagem dbox misses some channels, i want to reflash it area nwest,need help guide.


You should start your own thread but the simple info is that you do not need to reflash, scanning should bring back all the channels.