Need orig File for VW Audi AGU Engine 1.8t 06A906018R 0261204673 SW:1037358163

[blade66]

Need orig File for VW Audi AGU Engine 1.8t 06A906018R 0261204673 SW:1037358163

[blade66]

no one ? come on mans

[veloseeped]

If it helps can give SW 358109 or 359591

[nick_f]

Both sw 109 and 591.

[blade66]

199538

please , i need only 06A906018R 0261204673 SW:1037358163 original stock file !!!

[veloseeped]

please , i need only 06A906018R 0261204673 SW:1037358163 original stock file !!!

What is your task?
Compare to some tuning? Than you can use any version as base - both are absolutely equal in part of calibrations maps used by tuning :nevreness:

358163 has very-very small difference from both another versons - just some corrections concerning idle mode.
Just use last 359591 SW-version as stock without any problems.

[blade66]

i need 1037358163 , if i use another software as 358109 or 359591, then i get immo problems

1037358163 is also in BOSCH HW 0261201141 and in 0261204993

i only need 1037 358163 please

[veloseeped]

i need 1037358163 , if i use another software as 358109 or 359591, then i get immo problems

1037358163 is also in BOSCH HW 0261201141 and in 0261204993

i only need 1037 358163 please

Sorry, but you write full quatch...
0261204993 is 06A906018CD for non-turbo 1.8 engine AGN
0261201141 is ECU for Lotus Europa-S with 2.0T engine Z20LER
Software is incompatible at all..

Number 1037358163 you search isn't flash software!!!.
It's MPU Intel 196KR firmware and it can't be changed!!
Do you take this number from paper label on MCU?
Than you go to useless search ;-)

You can't have any immo problems when you write any of above soft versions (for flash 29F200) in 06A906018R 0261204673 ECU
Immo data is in eeprom and not depend from valid versions of flash content.

[blade66]

i get this info from here:



Bosch

0261204993 (http://www.boschecus.com/bosch-0261204993-dme-audi-a3-1-8-20v-ecu)

1037358163 (http://www.boschecus.com/cars-and-engines-with-bosch-ecu-sw-number-1037358163)
DME
AUDI
A3
1.8 20V (http://www.boschecus.com/bosch-ecu-sw-and-hw-numbers-used-for-engine-1-8-20v)

Petrol engine ECU


Bosch
0261206141 (http://www.boschecus.com/bosch-0261206141-dme-skoda-octavia-1-8-turbo-ecu)
1037358163 (http://www.boschecus.com/cars-and-engines-with-bosch-ecu-sw-number-1037358163)
DME
SKODA
OCTAVIA
1.8 TURBO (http://www.boschecus.com/bosch-ecu-sw-and-hw-numbers-used-for-engine-1-8-turbo)
Petrol engine ECU





but my But my AGU ECU has this data: 06A906018R 0261204673 SW:1037358163http://s1.directupload.net/images/130523/6f3yzjrr.jpg

[veloseeped]

With same succses you can take info written on the wall in WC... ;-)

Do you hear me???
Once again - it's number of MCU firmware. Has nothing common to the software number in flash
I've checked - 018R ECU have only 2 software versions
358109 and 359591
That's all.
Set point.

200027

[brchip]

With same succses you can take info written on the wall in WC... ;-)

Do you hear me???
Once again - it's number of MCU firmware. Has nothing common to the software number in flash
I've checked - 018R ECU have only 2 software versions
358109 and 359591
That's all.
Set point.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=200027&stc=1

Thank you! I also have a M3.8.3 Audi A3 1.8T 0261206518 with this label 358163 on the MCU and got confused.

My problem is that this ECU was tuned by someone and now it's not working. I'm trying to put it back to the original.

The software I got from reading 29F200 was 0261206516 (not 518!) and 350781.

[Apsik]

If the ECU is not working ... probably it's gone so even original file won't help you.
My suggestion is: buy another AGU ECU, copy eeprom content (or resolder it), flash your new ECU with stock 06A906018R file (SW does not matter)
Job done.

I played with AGU ECUs a lot, mostly on old Passats 1.8T. Because AGU ECU is OBD flashable.

[Cardump]

here ori flash golf 0261204673